Gearslutz.com
All Advertisers

Go Back   Gearslutz.com > The Forums > Studio construction & acoustics > Studio building / acoustics

Similar Threads
Thread Thread Starter Forum Replies Last Post
JBL LSR4300 monitors with the Room Mode Correction : solution for non-treated room ? sergioelectro So much gear, so little time! 34 21st May 2008 10:29 PM
Help with recording voice and piano in a bad room sparklehorse617 Remote Possibilities in Acoustic Music & Location Recording 9 10th February 2008 04:03 AM
Natural sounding headphones for a bad room chemicalwinter So much gear, so little time! 11 21st August 2007 09:57 PM
Weird, Triangle Room - Bad Acoustics bassbrock Low End Theory 21 1st May 2007 12:25 PM
room mics for drums if the room sounds bad? mattoxxx So much gear, so little time! 9 2nd March 2004 10:02 PM

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 19th April 2008, 06:16 AM   #1
akjl4
Gear maniac
 
Join Date: Aug 2007
Location: alaska
Posts: 182
Send a message via ICQ to akjl4
New Monitors bad room.

Well I just hooked up my Event asp8s and was testing them with a test tone generator and discovered that at different low frequencys that there were places in the room that I could not hear and feel the sound nearly as much, it was like I walked into a different room. Also different frequencys would deaden in different spots through out the room. Is this a good indicator that I need bass traps? And are the diy mineral wool ones effective?
akjl4 is offline   Reply With Quote
Old 19th April 2008, 12:23 PM   #2
bpape
Gear addict
 
Join Date: Jul 2005
Location: St. Louis(Wildwood), MO
Posts: 438
Pretty much every room require bass control of some sort. Even with a treated room, there will be places where the bass isn't smooth and even. The idea is to get it smooth and controlled where you listen.

Mineral wool absorbers can do a fine job if done properly and placed properly. If you'd care to post a bit more information about your room, we'd be able to give you a lot better advice. Corners are an efficient place for absorption as they're at the end of room boundaries where bass tends to build up and you're dealing with multiple dimensions in one place. However, that's rarely a 100% solution. You still need to deal with any SBIR issues as well as potential nulls off the rear wall, etc.

Bryan
__________________
I am serious, and don't call me Shirley

Bryan Pape
Lead Acoustical Designer
GIK Acoustics
bpape is online now   Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT +1. The time now is 04:27 PM.


Powered by vBulletin®
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0