Old 27th July 2006
  #1
Lives for gear
 

Thread Starter
Do i mix below 0

I work in Nuendo 3 with a Roland vm7200 v mixer. Do i have all the levels on the mixer at 0 or -10db? WHat is a good level to start. And also in NUendo?


Also if i dont want to use the mix buss in the mixer how would i bypass Nuendo? Or i i just want to use the Roland buss how i bypass the NUendo buss?
Old 27th July 2006
  #2
Lives for gear
 
djui5's Avatar
 

I always set the faders to -10 if I start a mix with the faders up.

Or, I'll bring them all down, and start pushing up things to see how they play with each other...then go from there.
Old 27th July 2006
  #3
Lives for gear
 

Thread Starter
-10 is - 6 to much is it good to have -3 db before mastreing?
Old 27th July 2006
  #4
Lives for gear
 
djui5's Avatar
 

Quote:
Originally Posted by spektor
-10 is - 6 to much is it good to have -3 db before mastreing?

That's a starting point. You have to remember that tracks build up. If you set them all to -10, your RMS might be -5...

This, of course, all depends on how loud they were recorded too.
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Similar Threads
Thread
Thread Starter / Forum
Replies
Sirocco / Work In Progress / Advice Requested / Show & Tell / Artist Showcase / Mix-Offs
9
tubejay / Gearslutz Secondhand Gear Classifieds
3
Unbound / Gearslutz Secondhand Gear Classifieds
4

Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read

SEO by vBSEO ©2011, Crawlability, Inc.