All Advertisers
| All Advertisers |
| Member Services Directory | Classifieds | Reviews | Jobs | Deal Zone | Merchandise | Marketplace | Facebook App | Books, DVDs & Gadgets | Video Vault | Tips & Techniques |
| |||||||
 New Reply | Thread Tools | Search this Thread |
19th July 2006
| #1 |
| Gear interested Joined: Jul 2006 Location: Portland
Posts: 13
Thread Starter | help with correct wiring altec 633a
when I disassembled the mic it was wired pin 3 ground but all the mic cables that i have are pin 1 ground. what is a standand wiring for this application??
|
|  |
|
4th July 2007
| #2 |
| Gear maniac  Joined: Dec 2002 Location: Raleigh, NC
Posts: 275
|
Open the mic and look at the back of the capsule, where the three wires are screwed in. Hold the capsule so you have one screw at the bottom and two at the top with a small hole in between the top two. The bottom screw is the ground, labeled G, which connects to XLR connector pin 1. The top left capsule pin, labeled 1, connects to XLR connector pin 3. The top right capsule pin, labeled 2, connects to XLR connector pin 2. See the attached for more info. |
|
| |
New Reply 
Facebook
Twitter
LinkedIn
| Thread Tools | Search this Thread |
| Similar Threads | ||||
| Thread | Thread starter | Forum | Replies | Last Post |
| Correct Me if Im Wrong... | T.J. | Low End Theory | 9 | 26th September 2005 08:30 AM |
| altec 1591 wiring | aleafstorm | Geekslutz forum | 0 | 18th September 2005 03:48 PM |
| Wiring question for an Altec 9061A | Dan-O | So much gear, so little time! | 5 | 16th December 2003 10:13 PM |
| Altec 436c Compressor wiring............ | yvesklein | High end | 2 | 28th July 2003 04:02 PM |
| |
