Tascam DV-RA1000 SDRAM Error!

[hasbeen]

Can you access the MENU using the button?

Press and hold the OPEN/CLOSE (SHUT DOWN) key for at least 30 seconds and see if the UDFMI feature appears.

Any luck using the remote?

Also, if there is a disc in the try stick a paper clip in to the tiny hole to open the thing up. You need to manually open the spring loaded tray cover.

[Eq_1084]

Originally Posted by hasbeen

Can you access the MENU using the button?

Press and hold the OPEN/CLOSE (SHUT DOWN) key for at least 30 seconds and see if the UDFMI feature appears.

Any luck using the remote?

Also, if there is a disc in the try stick a paper clip in to the tiny hole to open the thing up. You need to manually open the spring loaded tray cover.

I tried holding SHUTDOWN key but nothing happened. As I turn on my Tascam it gives a blank screen for a minute or half and then shows the SDRAM error message. no buttons are working and no lights are blinking its just dead with an error message on it.

[hasbeen]

I have never opened mine, but I wonder if the SDRAM chip is the plug in type and may be loose?

[Eq_1084]

BUMP!

[hasbeen]

call 323-727-7617 or e-mail at Custser@teac.com

They are very helpful, and should be open right now!

[Eq_1084]

thanks