Knob Box...(Analog Poly Filter..?..)

[r0ck1r0ck2]

I'm just crazy about this German Synth Co. (El Cheapo)
feast your eyes upon it...

Who is the U.S. Distro?!?



MFB-MultiFilter


* Stereo 24 dB Lowpass-Filter
* Stereo 12 dB High-, Low- and Bandpass-Filter
* Compressor – Ring Modulator - Distortion
* 3 step-sequencers with 16 steps
* 2 LFOs: triangle, sawtooth, square and random wave
* control for Filter-Spacing, Panorama and Filter-Balance
* 2 envelopes with Attack, Decay and Contour controls
* MSRP 480,- Euro

The MFB-MultiFilter is an analogue stereo-effects processor that can be used to edit, filter and modify the input signal. This is how it works:

The input signal is leveled with the initial gain stage and through an adjustable compressor. From here, the signal enters a Ring Modulator that uses internal or external sources for processing and that can be controlled by the integrated step-sequencer. Next is a distortion stage, again under manual or sequencer control. The Routing pushbutton sets the signalflow from here: select a direct feed to the outputs, send the signal parallel to both filter sections or chose a serial routing from the 12 dB filter into the 24 dB filter, or vice versa.
The 24 dB Lowpass-Filter is the well-established cascade filter with adjustable cutoff and resonance that can both be modulated by different sources. The envelope generator has Attack and Decay controls as well as a Contour knob for adjustable intensity. Spacing shifts the cutoff frequency between the stereo filter’s left and right channel. Here, the sequencer section can modulate cutoff, resonance, spacing and decay of both filters units.
The basic function of the 12 dB multimode filter are alike but offer further options: Highpass, Lowpass and Bandpass modes are available concurrently and offer individual level controls.
Balance allows one-knob-crossfade-control between the 24 dB- and 12 dB filter section, and is under LFO control for modulation. The output panorama control is again manually adjustable or can be modulated. Finally, there’s a level control for the output as well as a convenient bypass switch.
The MFB-MultiFilter includes three internal step-sequencers that can adress one of twelve modulation destinations each. Each sequencer stores ten programmable sequence lines with up to 16 steps. In addition, an internal sequence can be replaced either by a MIDI-sequence or by an audio signal connected to the EXT input. If EXT is not connected, the regular input signal will be used for the envelope follower section.
The MFB-MultiFilter measures 320 x 310 x 38/72 mm and includes an external power supply.

MFB products are sold at your musical instruments dealer. If you can´t find any reseller closeby we will also sell the MFB-MultiFilter directly within Germany. The price is 480 Euro (incl. VAT plus 10 Euro shipping, cash on delivery).

thanks GearJunkies...
MFBerlin

[r0ck1r0ck2]

i'm giving this a jump cause my ego knows no bounds

[chester]

hi, i do live in berlin. can i do some for you ?

ciao