Sansamp PSA-1 stereo/mono question.

Mondial Music · 25th November 2009, 03:34 PM

Anyone knows wether it's the same signal running through the L&R outs or if there is a stereo image to the sound? I would like to record the PSA-1 in mono and was wondering what the best way to do this would be, as it only has stereo outputs.

Regards, Erik.

marcpl · 25th November 2009, 03:38 PM

hi erik. i've owned one for years and the signal is identical on both channels.

marco

sniperschool · 25th November 2009, 03:59 PM

it's the same
stick a delay on one of the outputs and/or a chorus or an FX if you want to artificially make them sound more like stereo

Mondial Music · 25th November 2009, 04:29 PM

Hi guys, well I'll just go with the L channel then. Also, do you connect yours directly to DAW or do you use it with amp and speaker?

Thanks!

marcpl · 25th November 2009, 07:46 PM

i usually run one of the outputs directly into my digi002 and one into my GK250RL and mic it. i record to 2 tracks and then blend them. i get good results that way.

marco

25th November 2009, 03:34 PM	#1
Mondial Music Gear Head Join Date: Oct 2009 Posts: 62	Sansamp PSA-1 stereo/mono question. Anyone knows wether it's the same signal running through the L&R outs or if there is a stereo image to the sound? I would like to record the PSA-1 in mono and was wondering what the best way to do this would be, as it only has stereo outputs. Regards, Erik. __________________ Out Chopin, be right Bach.

25th November 2009, 03:59 PM	#3
sniperschool Lives for gear Join Date: Nov 2008 Location: UK Posts: 1,230	it's the same stick a delay on one of the outputs and/or a chorus or an FX if you want to artificially make them sound more like stereo __________________ respect your ghosts

25th November 2009, 04:29 PM	#4
Mondial Music Gear Head Join Date: Oct 2009 Posts: 62	Hi guys, well I'll just go with the L channel then. Also, do you connect yours directly to DAW or do you use it with amp and speaker? Thanks! __________________ Out Chopin, be right Bach.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sansamp RBI vs Sansamp PSA 1	shadyru	Low End Theory	3	7th November 2009 12:36 PM
Sansamp PSA 1 vs PSA 1.1 (hardware)	JB872	So much gear, so little time!	13	29th August 2008 09:23 PM
Sansamp PSA-1 question	mushi	So much gear, so little time!	8	3rd February 2008 03:29 AM
Sansamp PSA	harry_seldon	instruments, guitar, bass, amps	3	24th September 2007 07:07 AM

25th November 2009, 03:38 PM	#2
marcpl Gear nut Join Date: Oct 2009 Location: New York Posts: 75	hi erik. i've owned one for years and the signal is identical on both channels. marco

25th November 2009, 07:46 PM	#5
marcpl Gear nut Join Date: Oct 2009 Location: New York Posts: 75	i usually run one of the outputs directly into my digi002 and one into my GK250RL and mic it. i record to 2 tracks and then blend them. i get good results that way. marco