Using plug-in effects with AUX sends

Sean Sullivan · 3rd November 2009, 05:58 AM

I've got a UAD-1 card that I intend to use mostly for effects and was wondering if there was a way to use them with AUX sends on a console.

travisbrown · 3rd November 2009, 06:14 AM

Sure. Simplest way is set up some tracks in your DAW. Stick some FX on them.

Route the inputs of your interface to these channels. Route the DAW channel outputs to the outputs of your interface.

Board aux send ---> converter/interface -->DAW ---> converter/interface ---> aux returns or channelstrips.

You may have to play around with your DAW's buffer settings to get the latency as low as possible.

BioMichanical · 3rd November 2009, 06:25 AM

I find this especially works best with setting up a reverb effects aux, so that everything will get the same reverb in the mix for consistency. Plus it helps tame the wetness of the reverb.

DeadPoet · 3rd November 2009, 11:42 AM

Because of the added latency this'll only work for time-based effects, not for eg. parallel compressing.

I use a combination of real auxing on the desk and some ITB-auxing. All FX are spit out to a stereo channel on the desk. EQing and stuff of the individual effects happens itb.

Herwig

3rd November 2009, 05:58 AM	#1
Sean Sullivan Lives for gear Join Date: Jul 2007 Location: Nashville Posts: 2,529	Using plug-in effects with AUX sends I've got a UAD-1 card that I intend to use mostly for effects and was wondering if there was a way to use them with AUX sends on a console.

3rd November 2009, 06:14 AM	#2
travisbrown Lives for gear Join Date: Sep 2006 Posts: 2,741	Sure. Simplest way is set up some tracks in your DAW. Stick some FX on them. Route the inputs of your interface to these channels. Route the DAW channel outputs to the outputs of your interface. Board aux send ---> converter/interface -->DAW ---> converter/interface ---> aux returns or channelstrips. You may have to play around with your DAW's buffer settings to get the latency as low as possible. __________________ I'm not a producer, but I play one on Gearslutz.com

3rd November 2009, 11:42 AM	#4
DeadPoet Lives for gear Join Date: Apr 2003 Location: Belgium Posts: 1,124	Because of the added latency this'll only work for time-based effects, not for eg. parallel compressing. I use a combination of real auxing on the desk and some ITB-auxing. All FX are spit out to a stereo channel on the desk. EQing and stuff of the individual effects happens itb. Herwig __________________ studio.gyraf.be

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Best way to use effects with limited aux sends	sunnyb	Low End Theory	4	30th July 2009 08:43 PM
Aux sends and stereo effects	swankdoc	So much gear, so little time!	2	19th July 2008 04:46 PM
How to feed balanced outputs from console aux sends to unbalanced line level effects	Jake Holland	Low End Theory	4	20th March 2008 12:55 AM
How many aux sends?	Beneficial	So much gear, so little time!	8	25th March 2005 01:32 AM
Monitor sends as Effects sends???	Coldsnow	So much gear, so little time!	1	29th July 2004 03:53 PM

3rd November 2009, 06:25 AM	#3
BioMichanical Gear nut Join Date: Feb 2008 Posts: 105	I find this especially works best with setting up a reverb effects aux, so that everything will get the same reverb in the mix for consistency. Plus it helps tame the wetness of the reverb.