All Advertisers
| All Advertisers |
| |||||||
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help connecting Hedd 192, Digi Sync I/O and Digi 192 I/O | acorredor | High end | 6 | 4th October 2006 03:29 PM |
| Help connecting Hedd 192, Digi Sync I/O and Digi 192 I/O | acorredor | So much gear, so little time! | 3 | 29th September 2006 11:19 PM |
| Mytek 192/Digi 192 A/B | oscar_wonderboy | High end | 8 | 21st April 2006 10:24 PM |
| Digi 192 and Digi 96 sound same at 48kHz? | Nik | High end | 10 | 12th April 2003 06:30 AM |
 |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
9th October 2008, 10:27 PM
| #1 |
| Gear addict  Join Date: Aug 2006 Location: Jacksonville, Fl
Posts: 320
| ? About Digi 192 I just bought a 192 with the xtra A/D card. The problem is I need 16 out also. I have been told that the only way to do this is to use the digital I/O on the unit. Will the Aphex 141 D/A converter work with the 192?????? I would be using the Adat out on the 192. Thanks in advance, Ric  |
|  |
|
10th October 2008, 02:40 AM
| #2 |
| Gear nut  Join Date: Apr 2008 Location: NYC
Posts: 89
| I see no reason why it shouldn't... ADAT is ADAT...As long as you have ADAT outputs on your 192 I/O, the Aphex will take that input and convert it. Then all you need is a proper DB-25 snake. (I would check that the pinout on the Aphex is some sort of standard...I'm not to familiar with different DB-25 configurations) |
|
| |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
| |
Linear Mode
