Logic & Waves Autotune

stevetothink · 27th March 2008, 12:10 AM

When I use the lite version of waves autotune in Logic 7.x it gets all glitchy on the vocal track. Has anyone else experienced this problem? If so, do you have any suggestions for fixing it?

Thanks

embrionic · 27th March 2008, 01:09 AM

Once you have had Waves Tune read the track pass via rewire, whether or not you have made changes to notes within the plug in, you cannot touch, edit, move or otherwise mess with the original audio regions, otherwise you have to start all over.

A couple of times I have tried the "reset parameters" or whatever its called and that has worked, but not every time.

It doesn't seem to mind automation, but somehow it knows if you tweaked or altered region boundaries and it gets freaked out.

That's been my experience at least.

stevetothink · 27th March 2008, 07:51 PM

My problem seems to be different. It doesn't like automation at all PLUS it glitches on a regular basis. Also, when I bounce a track, the autotune puts digital glitches in the entire mix.

embrionic · 27th March 2008, 08:08 PM

i would try Waves Support then, they are usually pretty quick to respond. Sorry my solution didn't work (it doesn't always work for me either, but usually).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Waves Plugs & Logic	Tommy Mas	So much gear, so little time!	2	25th February 2008 08:26 PM
Waves Solid State Logic E Channel & G Buss plugins	Shan	New product alert!	258	17th February 2006 10:17 PM
Waves & Logic clash	neilsby	Music computers	2	8th May 2004 10:10 PM

27th March 2008, 12:10 AM	#1
stevetothink Gear nut Join Date: Aug 2006 Location: nj Posts: 140	Logic & Waves Autotune When I use the lite version of waves autotune in Logic 7.x it gets all glitchy on the vocal track. Has anyone else experienced this problem? If so, do you have any suggestions for fixing it? Thanks __________________ Steven

27th March 2008, 01:09 AM	#2
embrionic Gear nut Join Date: Feb 2006 Posts: 88	Once you have had Waves Tune read the track pass via rewire, whether or not you have made changes to notes within the plug in, you cannot touch, edit, move or otherwise mess with the original audio regions, otherwise you have to start all over. A couple of times I have tried the "reset parameters" or whatever its called and that has worked, but not every time. It doesn't seem to mind automation, but somehow it knows if you tweaked or altered region boundaries and it gets freaked out. That's been my experience at least. __________________ music :.\|. www.embrionic.tv :.\|. :.\|.:.\|.:.\|.:.\|. \| The 500 Series Database \| :...www.LunchBoxHero.com

27th March 2008, 07:51 PM	#3
stevetothink Gear nut Join Date: Aug 2006 Location: nj Posts: 140	Autotune Waves My problem seems to be different. It doesn't like automation at all PLUS it glitches on a regular basis. Also, when I bounce a track, the autotune puts digital glitches in the entire mix. __________________ Steven

27th March 2008, 08:08 PM	#4
embrionic Gear nut Join Date: Feb 2006 Posts: 88	i would try Waves Support then, they are usually pretty quick to respond. Sorry my solution didn't work (it doesn't always work for me either, but usually). __________________ music :.\|. www.embrionic.tv :.\|. :.\|.:.\|.:.\|.:.\|. \| The 500 Series Database \| :...www.LunchBoxHero.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: