Mbox Micro Compatible with Pro Tools M-Powered???

Antagonist · 29th January 2008, 03:24 PM

I use M-Audio interfaces/Apogee AD at my home studio, so I work specifically on Pro Tools M-Powered.

I would like the ability to mix tracks on the road without lugging around my firewire interface.

Obviously the new M-Box Micro would do this perfectly.

Anybody know though, if the M-Box micro is compatible with Pro Tools M-Powered? I noticed on the digi site that it comes with Pro Tools LE, and the bread and butter software/fx package.

I would hate to get this thing, and have to install LE on my system on top of already having M-Powered.

Anybody with the answer, let me know.

Thanks
Antagonist
MySpace.com - ANTAGONIST - CALIFLORIDA - Hip Hop / Rap / Crunk - www.myspace.com/leftcoastrider

throstur · 29th January 2008, 03:38 PM

No. M-box micro is not compatible with Pro Tools M-powered.

But you could use something like this with M-powered.
M-AUDIO - JamLab - Personal Guitar System

Eric Greedy · 29th January 2008, 06:37 PM

get the M-Audio Transit... i have one in my brief case just for this purpose. plus, the Micro only goes to 48K. The transit lets you work up to 96K and in a pinch you could record into it if you had to get an idea down. Since you already have the software...it'll only cost you about $79 to get the Transit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Motherboards compatible with Pro Tools 7	alphamalemusic	Music computers	0	7th January 2008 02:49 AM
Is Pro Tools 7.3 compatible with UA card?	Spookym15	Music computers	6	22nd April 2007 04:03 AM
MBox 2 Pro vs 003 vs M-Powered	dodd1967	So much gear, so little time!	0	26th March 2007 08:06 PM
Pro Tools 7 sessions compatible with PT 6.x?	mantaray	Music computers	1	20th December 2006 03:44 PM
M-Powered vs Mbox 2/Pro?	TREMORS	Music computers	0	31st October 2006 01:32 AM

29th January 2008, 03:24 PM	#1
Antagonist Gear maniac Join Date: Apr 2007 Location: South Florida / Califlornia Posts: 196	Mbox Micro Compatible with Pro Tools M-Powered??? I use M-Audio interfaces/Apogee AD at my home studio, so I work specifically on Pro Tools M-Powered. I would like the ability to mix tracks on the road without lugging around my firewire interface. Obviously the new M-Box Micro would do this perfectly. Anybody know though, if the M-Box micro is compatible with Pro Tools M-Powered? I noticed on the digi site that it comes with Pro Tools LE, and the bread and butter software/fx package. I would hate to get this thing, and have to install LE on my system on top of already having M-Powered. Anybody with the answer, let me know. Thanks Antagonist MySpace.com - ANTAGONIST - CALIFLORIDA - Hip Hop / Rap / Crunk - www.myspace.com/leftcoastrider

29th January 2008, 06:37 PM	#3
Eric Greedy Gear addict Join Date: Aug 2005 Posts: 475	get the M-Audio Transit... i have one in my brief case just for this purpose. plus, the Micro only goes to 48K. The transit lets you work up to 96K and in a pinch you could record into it if you had to get an idea down. Since you already have the software...it'll only cost you about $79 to get the Transit. __________________ www.ericgreedy.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

29th January 2008, 03:38 PM	#2
throstur Gear Head Join Date: Aug 2007 Location: Iceland / London Posts: 35	No. M-box micro is not compatible with Pro Tools M-powered. But you could use something like this with M-powered. M-AUDIO - JamLab - Personal Guitar System