Adding extra aux send to a mixer channel?

Coldsnow · 27th January 2008, 10:19 PM

So I'm thinking on some of the channels were I may need extra aux sends, Ying off the line before the input on the mixer running the to both the main mixer and another mixer with extra aux sends, then running the effects back to the main mixer without the signal from the extra mixer going back to the main mixer because that will be controlled through the main mixer (other end of the Y). Obviously the effect will not be changed with the channel fader on the main mixer but besides that, will it work?

Coldsnow · 28th January 2008, 11:30 PM

Anyone?

peac hh

Mayor999 · 28th January 2008, 11:44 PM

It will work...however I would do it a couple of different ways....

If you are not using inserts on the channels you need more aux's on I would use the Insert Send on that channel.

OR

If you have separate direct outs I would use those...

OR

As you suggested if you have a patch bay / Y-chords I would use them.

The reason for the top two options is to have that gain stage in there and depending on your mixer any EQ/inserts and what not. I am very wary about using Y cables unless I absolutely have to.

Cheers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Otari Elite aux send pots for sale	Jeff Goodman	Geekslutz forum	0	5th November 2007 05:51 PM
AUX send level?	big country	Remote Possibilities in Acoustic Music & Location Recording	24	15th July 2007 07:50 PM
Aux Send/Return levels	Kyle Ashley	So much gear, so little time!	1	2nd October 2006 12:55 AM
Adding extra AES inputs/outputs to fireface?	Matthew Murray	So much gear, so little time!	4	4th May 2006 05:35 AM
Aux send without mixing desk	grooved	So much gear, so little time!	12	13th January 2006 03:04 AM

27th January 2008, 10:19 PM	#1
Coldsnow Lives for gear Join Date: Jul 2002 Posts: 583	Adding extra aux send to a mixer channel? So I'm thinking on some of the channels were I may need extra aux sends, Ying off the line before the input on the mixer running the to both the main mixer and another mixer with extra aux sends, then running the effects back to the main mixer without the signal from the extra mixer going back to the main mixer because that will be controlled through the main mixer (other end of the Y). Obviously the effect will not be changed with the channel fader on the main mixer but besides that, will it work?

28th January 2008, 11:30 PM	#2
Coldsnow Lives for gear Join Date: Jul 2002 Posts: 583	Anyone?peac hh

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

28th January 2008, 11:44 PM	#3
Mayor999 Lives for gear Join Date: Nov 2007 Location: Minneapolis MN Posts: 931	It will work...however I would do it a couple of different ways.... If you are not using inserts on the channels you need more aux's on I would use the Insert Send on that channel. OR If you have separate direct outs I would use those... OR As you suggested if you have a patch bay / Y-chords I would use them. The reason for the top two options is to have that gain stage in there and depending on your mixer any EQ/inserts and what not. I am very wary about using Y cables unless I absolutely have to. Cheers!