Monitor noise

DWINC · 30th July 2007, 04:54 PM

Hey guys,

Maybe a strange question, but I was hoping that I would get rid of the noise that my amp generates fueling my cheap KRK passive monitors by buying active monitors (Samson Rubicon 8 A)

I mean...they are really great, but when I am mixing I can not get used to the noise that I hear (sometimes even jitterish noise..)

I use a G5 with a RME Hammerfall HDSP. I tried to click different values in the Hammerfall settings (maybe the sound would improve, but unfortunately not). It almost sound like it is an earthing problem..a
I know....just lower the volume...but that is not it....When you are mixing 8 hours a day you will end up in a sanatarium this way

Any suggestions?

Thanks!!

Slaytex · 30th July 2007, 05:04 PM

Make sure your power cables are not running parallel to any audio (speaker)cables of any sort.

tINY · 30th July 2007, 06:15 PM

Are you running the outs to the amp on balanced cables?

Also, try moving your amp a bit. Line level can go 100' easy and 20-30' on speaker cable to the ST8 shouldn't be a problem (they don't draw that much power or have any cross-over weirdness).

-tINY

30th July 2007, 04:54 PM	#1
DWINC Gear maniac Join Date: Oct 2006 Location: The Netherlands Posts: 164	Monitor noise Hey guys, Maybe a strange question, but I was hoping that I would get rid of the noise that my amp generates fueling my cheap KRK passive monitors by buying active monitors (Samson Rubicon 8 A) I mean...they are really great, but when I am mixing I can not get used to the noise that I hear (sometimes even jitterish noise..) I use a G5 with a RME Hammerfall HDSP. I tried to click different values in the Hammerfall settings (maybe the sound would improve, but unfortunately not). It almost sound like it is an earthing problem..a I know....just lower the volume...but that is not it....When you are mixing 8 hours a day you will end up in a sanatarium this way Any suggestions? Thanks!! __________________ The Score Studio The Netherlands Visit www.thescorestudio.com or www.myspace.com/thescorestudio Stuff: Logic Pro 7, SSL Duende, Focustrite Octopre Lite, Behringer ADA 8000, MPC 1000, Korg Triton Extreme 88, Korg K 700 1968, Mackie Big Knob, Rubicon 8 A and KRK ST8 monitors, Mackie Control Universal mixer, PowerMac G 5 Dual 1.8 3ghz, Patchbay and lots of AU (legal!!) and a great studio!

30th July 2007, 05:04 PM	#2
Slaytex Lives for gear Join Date: Jul 2004 Location: Charlotte Posts: 975	Make sure your power cables are not running parallel to any audio (speaker)cables of any sort. __________________ Clayton Yunt Full Volume Sound Full Volume Sound

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Noise... Ground Issues... Noise Reduction Plugs	joenovice	Low End Theory	11	1st April 2007 09:01 PM
Solution to Viewsonic LCD monitor noise	Kiwiburger	So much gear, so little time!	1	20th November 2006 07:10 PM
Does rosetta 200,800 produce fan noise or other noise?	bluesj	High end	6	27th July 2006 09:53 AM
LCD Monitor Noise	Voicer	So much gear, so little time!	0	21st March 2006 10:02 PM
Monitor Passing Noise Thru Console!!!	blackbox	So much gear, so little time!	4	24th January 2005 10:05 PM

30th July 2007, 06:15 PM	#3
tINY Lives for gear Join Date: Jul 2004 Location: Orygun Posts: 8,869	Are you running the outs to the amp on balanced cables? Also, try moving your amp a bit. Line level can go 100' easy and 20-30' on speaker cable to the ST8 shouldn't be a problem (they don't draw that much power or have any cross-over weirdness). -tINY