Anyone using all 18 available inputs on Digi 002...?!?

Einar · 30th June 2007, 01:59 AM

Hello fellow gearslutz...

I´ve got a digi 002 and I´m about to max out the available inputs by getting a Joe Meek TwinQ which I intend to connect through the S/PDIF plug on the 002. I have a 8 channel M-Audio Octane which is plugged in the ADAT / Lightpipe, and 2 other dual channel pre´s that occupy inputs 5,6,7 and 8. I use the Octane as a master clock-source and the digi and the other 2 pre´s are routed through that clock.
...Here´s my question; since the Digi 002 does not have word clock in or outputs, how can I sync the preamp going into s/pdif??
If any of you who have similar setups, i.e. using all 18 available inputs on the Digi 002 could help me out with this I´d be most grateful!!

the1Hub · 30th June 2007, 02:37 AM

if the joe meek has a word clock in what you need to do is run a WC cable from the octane to the joe meek. that will deliver the same clock via spidif that the 002 is seeing from the adat in.

gusegruv · 30th June 2007, 03:44 AM

make sure you choose which WC input you want inside your Digi prefrences.

Einar · 30th June 2007, 03:54 AM

Ok awsome... thank you guys!

Could elaborate a little bit about where and how in the preferences this is done..?

Thanks!

gusegruv · 30th June 2007, 04:01 AM

just off the top of my head i think its in

Setups Menu: Preferences > Operations.

not in front of my system at the moment.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Digi 002 rack 5-8 inputs	deathman	So much gear, so little time!	12	5th January 2007 03:14 PM
Digi 002 Control Surface vs Digi Control 8 + 002 Rack ?	bjm007	Music computers	25	17th September 2006 06:46 PM
Sound quality: Digi 001 w/Digimax @24/48 or Digi 002 @24/96?	zonkola	Music computers	9	24th March 2006 07:43 AM
problem with 002 line inputs 1-4?	r0ck1r0ck2	So much gear, so little time!	1	15th January 2006 07:38 PM
additional inputs to the 002?	Jamz	Music computers	0	14th August 2004 11:42 PM

30th June 2007, 01:59 AM	#1
Einar Gear addict Join Date: Mar 2007 Location: Planet Earth Posts: 324	Anyone using all 18 available inputs on Digi 002...?!? Hello fellow gearslutz... I´ve got a digi 002 and I´m about to max out the available inputs by getting a Joe Meek TwinQ which I intend to connect through the S/PDIF plug on the 002. I have a 8 channel M-Audio Octane which is plugged in the ADAT / Lightpipe, and 2 other dual channel pre´s that occupy inputs 5,6,7 and 8. I use the Octane as a master clock-source and the digi and the other 2 pre´s are routed through that clock. ...Here´s my question; since the Digi 002 does not have word clock in or outputs, how can I sync the preamp going into s/pdif?? If any of you who have similar setups, i.e. using all 18 available inputs on the Digi 002 could help me out with this I´d be most grateful!!

30th June 2007, 02:37 AM	#2
the1Hub Gear addict Join Date: Feb 2005 Location: where there are blue skies 315 days a year Posts: 450	if the joe meek has a word clock in what you need to do is run a WC cable from the octane to the joe meek. that will deliver the same clock via spidif that the 002 is seeing from the adat in. __________________ hmm... http://www.myspace.com/aaronhubbard

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

30th June 2007, 03:44 AM	#3
gusegruv Gear nut Join Date: Jun 2007 Posts: 96	make sure you choose which WC input you want inside your Digi prefrences.

30th June 2007, 03:54 AM	#4
Einar Gear addict Join Date: Mar 2007 Location: Planet Earth Posts: 324	Ok awsome... thank you guys! Could elaborate a little bit about where and how in the preferences this is done..? Thanks!

30th June 2007, 04:01 AM	#5
gusegruv Gear nut Join Date: Jun 2007 Posts: 96	just off the top of my head i think its in Setups Menu: Preferences > Operations. not in front of my system at the moment.