How to use the DA in my setup?+

boboji · 14th January 2007, 09:42 PM

I'm running an Alesis HD24 and Mackie 24/8 setup with great outboard gear. I have set up issues with setting up a new Rosetta 200 with this system. No problem tracking through the AD then to the HD24 but where do I want to use the DA? In the 2 buss mix or before the monitors or????

boboji · 15th January 2007, 07:55 PM

Anybody have a suggestion where to use the DA in my setup

pre>Apogee 200>hd24..............>cd burner
>monitors

gigantorbuzz · 15th January 2007, 09:04 PM

the D/A side of the Rosetta is normally for your monitors

the Rosetta has every set of outs you could need so run the analog outs to your monitors (or your monitoring station rather, since the Rosetta has no monitoring controls)... the optical or spdif you can run to your CD burner..

Zwinter · 15th January 2007, 10:27 PM

Quote:

Originally Posted by boboji

I'm running an Alesis HD24 and Mackie 24/8 setup with great outboard gear. I have set up issues with setting up a new Rosetta 200 with this system. No problem tracking through the AD then to the HD24 but where do I want to use the DA? In the 2 buss mix or before the monitors or????

Okay, I would use the Rosetta 200 ADafter the console, but before the CD recorder. Then use the DA for the CD's output.

Make sense?

boboji · 16th January 2007, 03:41 AM

Thanks for responding Zach.

Uhhhh no this dosen't make sense to me. Don't I want my signal going through the Rosetta before going to tape?

I'm mixing to the cd burner and not using its outputs at all.

Could you clarify????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setup	fortheloveofgod	So much gear, so little time!	0	9th December 2006 12:02 AM
need EQ for my setup	cosmos	High end	18	25th June 2006 09:42 PM
Setup issue regarding Digi 192 and Apogee DA16x Setup issue:Digi192 and Apogee DA16x	Redsandblu	Music computers	3	12th June 2005 10:59 PM
Setup help!	Bonus	So much gear, so little time!	3	18th October 2004 06:47 PM
First setup	Portsound570	So much gear, so little time!	17	8th March 2004 09:56 PM

14th January 2007, 09:42 PM	#1
boboji Gear maniac Join Date: Oct 2004 Location: san diego Posts: 156	How to use the DA in my setup?+ I'm running an Alesis HD24 and Mackie 24/8 setup with great outboard gear. I have set up issues with setting up a new Rosetta 200 with this system. No problem tracking through the AD then to the HD24 but where do I want to use the DA? In the 2 buss mix or before the monitors or????

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

15th January 2007, 07:55 PM	#2
boboji Gear maniac Join Date: Oct 2004 Location: san diego Posts: 156	Anybody have a suggestion where to use the DA in my setup pre>Apogee 200>hd24..............>cd burner >monitors

15th January 2007, 09:04 PM	#3
gigantorbuzz Gear nut Join Date: Aug 2006 Posts: 95	the D/A side of the Rosetta is normally for your monitors the Rosetta has every set of outs you could need so run the analog outs to your monitors (or your monitoring station rather, since the Rosetta has no monitoring controls)... the optical or spdif you can run to your CD burner..

16th January 2007, 03:41 AM	#5
boboji Gear maniac Join Date: Oct 2004 Location: san diego Posts: 156	Thanks for responding Zach. Uhhhh no this dosen't make sense to me. Don't I want my signal going through the Rosetta before going to tape? I'm mixing to the cd burner and not using its outputs at all. Could you clarify????