In Ear Monitoring Solution For Whole Band?

[BigJunk]

This is more a live stage thread but I'm sure there are a lot of experienced people who could chime in.

For my band, I have a four output firewire interface coming from a laptop playing four different mixes for my band's shows. Drummer gets click and some prerecorded mix, singer gets just the guitars and click to sing to, I'm the guitarist and I get click and a bit of whole mix, and bassist just gets click.

We have a rack of various in ear systems from different companies like Shure and Sennheiser and there is a lot of wiring and its a mess. Is there a company who makes a four channel in ear unit that will allow us to remove some of the clutter from this rack and just use one rack processor to send the signals out? I've done some research and can't find a solution yet.

Junk

[PinnacleProdUK]

I think you could look at something from AKG but it starts to get quite expensive when you look at whats needed.

The SPC 4 wideband antenna combiner allows the set up of large wireless in-ear monitor systems. A single antenna combiner enables the output signals of up to four SST 4 stereo transmitters to be combined into one composite antenna signal. Besides this antenna management function, the SPC 4 powers the SST 4 stereo transmitters connected to it, thus reducing the number of plug-in AC adapters in the rack.
You can use either an SRA 2 W passive directional antenna or an RA 4000 W passive omnidirectional antenna for the wireless monitor system.
The four-channel in-ear monitor system shown in the example drawing occupies only 3 U of rack space.




Specifications:
4 x SST 4 Stereo Transmitter
4 x SPR 4 Stereo Pocket Receiver
1 x SPC 4 Power Combiner
1 x PSU 4000 Central Power Supply
1 x SRA 2 W Passive Wide-Band Directional Antenna


4-channel IVM 4 - Have a browse about on the AKG website as they offer different solutions!