Effect Automation on Output

MYAMS · 30th June 2008, 06:34 PM

Hey, I usually don't mix my own music, but recently took on a project that required me to do a quick mix, so I did a quick job ITB with the sonnox plugs I am demoing. I wanted to automate a filter plug on the output for a breakdown section and was not sure how to do it. I am running Logic Pro 8.

Drum9uy · 30th June 2008, 06:51 PM

I'm not as experienced with logic, but with most DAWs, enable the channel to write automation and then open up the filter and change the parameter you want to be automated. This will write automation to a lane where you can then edit it in a more refined manner.

hope that helps

MYAMS · 30th June 2008, 08:55 PM

is there an automation for bypass then, because I don't want it running at all in other parts of the track

Drum9uy · 30th June 2008, 09:57 PM

Yeah you should be able to simply arm the track to write automation, then hit play, pull up the plug and hit bypass when you want it to bypass, once that's written you can edit when that exactly happens just like writing panning, mute, etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Duet output clipping.. how can I change my Mac's output level?	coyotekells	Low End Theory	3	16th June 2008 01:14 AM
Multi input (output)- multi effect unit	pyelagin	Electronic Music Instruments & Electronic Music Production	9	7th October 2007 03:18 AM
Cubase: Automation lines to produce wah-effect?	DarkEcho	Music computers	5	1st August 2007 03:36 PM
Board Automation vs. DAW Automation	jb_studio	High end	8	9th May 2005 11:21 PM

30th June 2008, 06:34 PM	#1
MYAMS Lives for gear Join Date: Oct 2007 Posts: 718	Effect Automation on Output Hey, I usually don't mix my own music, but recently took on a project that required me to do a quick mix, so I did a quick job ITB with the sonnox plugs I am demoing. I wanted to automate a filter plug on the output for a breakdown section and was not sure how to do it. I am running Logic Pro 8.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

30th June 2008, 06:51 PM	#2
Drum9uy Gear nut Join Date: Feb 2008 Location: near Boston Posts: 82	I'm not as experienced with logic, but with most DAWs, enable the channel to write automation and then open up the filter and change the parameter you want to be automated. This will write automation to a lane where you can then edit it in a more refined manner. hope that helps

30th June 2008, 08:55 PM	#3
MYAMS Lives for gear Join Date: Oct 2007 Posts: 718	is there an automation for bypass then, because I don't want it running at all in other parts of the track

30th June 2008, 09:57 PM	#4
Drum9uy Gear nut Join Date: Feb 2008 Location: near Boston Posts: 82	Yeah you should be able to simply arm the track to write automation, then hit play, pull up the plug and hit bypass when you want it to bypass, once that's written you can edit when that exactly happens just like writing panning, mute, etc.