BUY A NEW ONE OR GET IT FIXED

critical · 1st July 2007

What up people,
My RS7000 sh*t the bed today.
When ever I load up a beat all of the instruments have changed.
(drums aren't drums,strings ain't strings ect...)
They dont make this machine anymore but Im sure I could probably find one used somewhere between 4-6 hundred.
Is there somewhere I could send it to get fixed,
should I call yamaha,
or should I just try to find a used one in good condition.

Thanks

beat you down · 1st July 2007

call yamaha first.
my xv 5050 acted REAL strange one day, sounds messed up and distorted, presets all gone etc.
i was prepared for the worse, only to find out it just needed some soldering.

goldenlotus · 2nd July 2007

Yeah call yahmaha. There must be a way to do a factory reset.

1st July 2007	#1
critical Gear nut Joined: Jan 2007 Posts: 126 Thread Starter	BUY A NEW ONE OR GET IT FIXED What up people, My RS7000 sh*t the bed today. When ever I load up a beat all of the instruments have changed. (drums aren't drums,strings ain't strings ect...) They dont make this machine anymore but Im sure I could probably find one used somewhere between 4-6 hundred. Is there somewhere I could send it to get fixed, should I call yamaha, or should I just try to find a used one in good condition. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
fixed ratio compressors	loaf	So much gear, so little time!	11	1st October 2006 01:20 AM
What can be fixed?	MrVelvet	Low End Theory	2	22nd August 2006 04:48 PM
Fixed manaul phase in series with a fixed manual flanger	Surfman	So much gear, so little time!	1	27th January 2006 07:49 PM
G5 problems fixed... I hope...	Hiwatt	Music computers	2	5th September 2004 07:10 AM
Fixed vs Floating	Nika Aldrich	High end	33	19th April 2004 02:16 AM

1st July 2007	#2
beat you down Lives for gear Joined: Aug 2006 Posts: 4,404	call yamaha first. my xv 5050 acted REAL strange one day, sounds messed up and distorted, presets all gone etc. i was prepared for the worse, only to find out it just needed some soldering.

2nd July 2007	#3
goldenlotus Lives for gear Joined: May 2007 Location: Brooklyn, NY Posts: 1,132	Yeah call yahmaha. There must be a way to do a factory reset.