Dolby A Type Model 361

Jesse Miller · 3rd November 2009

Chris,

Saw the studio tip using the Dolby unit in the Vox chain. Do you track thru the Dolby unit, or Insert it later.

If you track thru it. Where in the signal chain do you place it?

Pulled both ours from the 2 Track cart and have them moved to the Pres / Comps rack. Want to get this trick right.

Jesse Miller

Chris Baseford · 4th November 2009

I usually use them on an insert on the monitor end (don't track the dolby), although if you like the sound of it while tracking, why not print it!
You need to send your signal to the encode end of the unit and then out before the decode... I think the input is labeled: "line in" and the output is labeled "to record"(or something like that), and then just make sure the "in" and "rec" buttons are pushed in on the front panel.

C.

3rd November 2009	#1
Jesse Miller Gear nut Join Date: Aug 2005 Location: Islamorada FL Keys Posts: 88 Thread Starter	Dolby A Type Model 361 Chris, Saw the studio tip using the Dolby unit in the Vox chain. Do you track thru the Dolby unit, or Insert it later. If you track thru it. Where in the signal chain do you place it? Pulled both ours from the 2 Track cart and have them moved to the Pres / Comps rack. Want to get this trick right. Jesse Miller __________________ Sessions Recording Islamorada FL Keys

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Dolby 361-A	IzzyRock	High end	18	5th August 2008 07:55 PM
Dolby 361 Problem	nicolasixxx	High end	6	17th March 2006 06:38 PM

4th November 2009	#2
Chris Baseford Gear interested Join Date: Oct 2009 Location: Los Angeles Posts: 24	I usually use them on an insert on the monitor end (don't track the dolby), although if you like the sound of it while tracking, why not print it! You need to send your signal to the encode end of the unit and then out before the decode... I think the input is labeled: "line in" and the output is labeled "to record"(or something like that), and then just make sure the "in" and "rec" buttons are pushed in on the front panel. C.