Control 24 Scribble Strips

TheWorkRoom · 16th May 2008, 08:58 AM

Sorry guys, have posted this on the duc, and no takers so far, maybe someone here has some info...

Lately scribble strips 13 & 14 do not display the correct information, depending on what Pro Tools session i am in they are either blank or they display random ASCI characters.

Anyone else experiencing this, or better, have a solution?

I have tried various sessions so it seems a Control 24 issue, i have also tried resetting the desk to its defaults, which has not helped.

Sending this back to Digi would be a huge issue.

Thanks in advance.

Stephen

seansolo · 16th May 2008, 02:32 PM

we had that on our Control-24 here - it's an original, V1 (read:old). After scribbles starting to fail we had bad motors on faders 3/12/18. I called Digi and they overnighted a free kit for fader packs and power supply. It is obviously a huge pain to yank it from the Argosy, but we didn't have to send it out.

Which revision is your unit? Give 'em a call (with the serial number) and you maybe surprised.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mackie Control C4 - Control for Reason 3.0, Plus Hands-On Control of Other MIDI Gear	The Press Desk at Gearslutz.com	New product alert!	5	26th October 2006 09:24 AM
IDEA --- USB meter bridge & LCD scribble strips	sigmatibet	So much gear, so little time!	10	6th October 2006 11:57 PM
What are you using for your mixing desk's scribble strips? masking tape?	carbon	So much gear, so little time!	27	20th October 2005 04:53 PM
TASCAM - RELEASE - US-2400 NEW Version Adds Scribble Strips, More	Noddy	New product alert!	15	6th September 2005 01:12 AM

16th May 2008, 08:58 AM	#1
TheWorkRoom Gear Head Join Date: Jan 2007 Location: Cape Town, South Africa Posts: 64	Control 24 Scribble Strips Sorry guys, have posted this on the duc, and no takers so far, maybe someone here has some info... Lately scribble strips 13 & 14 do not display the correct information, depending on what Pro Tools session i am in they are either blank or they display random ASCI characters. Anyone else experiencing this, or better, have a solution? I have tried various sessions so it seems a Control 24 issue, i have also tried resetting the desk to its defaults, which has not helped. Sending this back to Digi would be a huge issue. Thanks in advance. Stephen __________________ Regards -- Stephen Webster Director TheWorkRoom Recording Studios Audio Production \| DVD Authoring T +27 (0) 21 426 5497 F +27 (0) 21 426 5498 M +27 (0) 72 644 9626 SKYPE: TheWorkRoomRecordingStudios http://www.theworkroom.co.za I.L Rosenberg House \| 80 Jordaan Street \| Bo Kaap \| Cape Town \| 8001

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

16th May 2008, 02:32 PM	#2
seansolo Gear nut Join Date: Oct 2007 Location: DC Posts: 77	we had that on our Control-24 here - it's an original, V1 (read:old). After scribbles starting to fail we had bad motors on faders 3/12/18. I called Digi and they overnighted a free kit for fader packs and power supply. It is obviously a huge pain to yank it from the Argosy, but we didn't have to send it out. Which revision is your unit? Give 'em a call (with the serial number) and you maybe surprised.