Presonus Firepod + Lexicon PCM80 via SPDIF - no return input
Old 22nd February 2013
  #1
Gear interested
 

Thread Starter
Presonus Firepod + Lexicon PCM80 via SPDIF - no return input

Here's my setup:
OS X Lion 10.7.5
Pro Tools 10.3.2
Presonus Firepod(FP10)
Lexicon PCM80

I connected Firepod and PCM80 with SPDIF cables, set SEND A on my vocal channel to Outpot 9-10, and set input on my aux track to Input 9-10. When I play the vocal track I see the signal LED on the PCM80 on, but I don't get anything back on my return track.The aux track is solo safe and I don't find anything wrong with my setup... Is there anything I might have done wrong or overlooked, or is there a setting in PCM80 for digital output?

(Easiest solution would be to use analog connection, but I want to minimize the A/D/A conversion...)
Old 22nd February 2013
  #2
Gear addict
 

Could be a clock issue...do you have the manual? You should be able to find a PDF online if you don't.
Old 25th February 2013
  #3
Lives for gear
Topic:
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Similar Threads
Thread
Thread Starter / Forum
Replies
Clueless / So much gear, so little time!
10
lakeshorephatty / So much gear, so little time!
2
destiny brandon / So much gear, so little time!
2
tho_dk / Music Computers
1

Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read

SEO by vBSEO ©2011, Crawlability, Inc.