Weiss ADC2 A/D Converter now with Firewire

[weiss2496]

The long awaited Firewire option for the Weiss ADC2 A/D Converter is now available. ADC2 converters can be upgraded with a plug-in board. Software installation is straightforward. Works with both PC and MAC.


See Weiss :: ADC2
Inquire with Daniel Weiss at weiss@weiss.ch

------------------------------------------------------------------------------------

Features of the ADC2:

Inputs:
Balanced LINE and MIC inputs on separate connectors. MIC input with switchable phantom power. Input sensitivity is settable in each channel independently (or ganged) with two rotary encoders. Line Input sensitivity: -16dBu to +26 dBu for 0dBFS output. Mic Input sensitivity: -54dBu to +6dBu for 0dBFS output. Separate AES/EBU input on XLR for synchronization and/or audio input to the DSP, which allows for use of the ADC2 for redithering and limiting of digital Signals.

Outputs:
AES/EBU on XLR in one or two wire technique, S/PDIF on RCA, Firewire.

Synchronization:
Internal sync selectable 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz.
External sync from Wordsync Input (BNC) or from AES/EBU input. Wordsync output on a BNC connector.

Metering:
One bargraph per channel with peak hold. Two over LEDs. Two numerical displays for input sensitivity

DSP Features:
POW-R dithering to 16 bits, settable to three different algorithms according to the POW-R standard. SNR enhancement. Level bar graph meter. Digital peak limiter.