Session closes when 'play' is pushed

BoTTanist · 10th December 2006

Hello,

Am using ProTools 7.1cs10 M-Powered on a Mac G5 dual 1.8mHz machine through a Projectmix I/O.

This problem applies to one particular session.

I'll open the session...fine. I try to play it and PT shuts closes. If I opne the session and fast forward a bit into the song, it will play and not shut down. Return to zero and try to play and PT closes.

?

thanks!

AlexLakis · 10th December 2006

Weird.

Have you tried the "Save Copy In..." command? This should create a new session file, which might solve your problem.

Another solution might be to create a new session and import all the tracks/settings from the old one. This solves problems for me when sessions all of a sudden decide they don't want to open anymore.

BoTTanist · 10th December 2006

I will try these and let you know.

Thanks very much!

BoTTanist · 10th December 2006

Well!...

I went into the session folder where there is another folder called, thankfully, 'Session Backups." There were about thirty of them. Opened an older one and Bingo! Back in business. The system saves a 'new' file with a .recovered. specification.

Works just fine!

Thanks!

10th December 2006	#1
BoTTanist Gear interested Joined: Dec 2006 Location: Northern Ohio Posts: 18 Thread Starter	Session closes when 'play' is pushed Hello, Am using ProTools 7.1cs10 M-Powered on a Mac G5 dual 1.8mHz machine through a Projectmix I/O. This problem applies to one particular session. I'll open the session...fine. I try to play it and PT shuts closes. If I opne the session and fast forward a bit into the song, it will play and not shut down. Return to zero and try to play and PT closes. ? thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Hip Hop: Are Songs "Pushed Back" during the mastering stage?	Sirocco	Mastering forum	9	21st June 2008 03:39 AM
Hafler closes, so what amp??	ezrecords	So much gear, so little time!	31	3rd October 2006 06:40 AM
Quantegy Closes	Vermeer	So much gear, so little time!	6	6th January 2005 08:43 PM
Quantegy Opelika Plant closes - The Death of Analog Tape	Ray Sigmond	Music computers	0	4th January 2005 01:05 AM

10th December 2006	#2
AlexLakis Lives for gear Joined: Mar 2005 Location: Annapolis, MD/Los Angeles, CA Posts: 3,631	Weird. Have you tried the "Save Copy In..." command? This should create a new session file, which might solve your problem. Another solution might be to create a new session and import all the tracks/settings from the old one. This solves problems for me when sessions all of a sudden decide they don't want to open anymore.