Help!!! protools7 002 interface

nevusmusic · 17th April 2006

How do I send the music out through the rca coaxial output of the 002. I just want to
send my music to an external cd burner. The song is done at 16bit 44. Where are the settings in protools 7 at.

ShamansDream · 17th April 2006

Ummmm... Those are not RCA outputs

Those are SPDIF which is a digital stereo signal; one pair out and one pair in.
What you need is an adapter cable that can take one of the output pair and plug that directly into your recorder.

nevusmusic · 17th April 2006

I have a coaxial cable going from my 002 to my cd burner. I'm not getting any audio.
The tracks are output also to the digital out. Is there something in protools 7 that I have to set??

Tizzo · 17th April 2006

Acording to my I/O setup for LE outputs B 1-2 are my SPDIF outputs, I'm assuming yours would be the same. Change your master fader's output from A 1-2 to B 1-2. If that doesn't work take a look at your I/O setups (located under the "setups" pull down menu to check your SPDIF output. Hope this helps!

17th April 2006	#1
nevusmusic Gear nut Joined: Mar 2006 Posts: 108 Thread Starter	Help!!! protools7 002 interface How do I send the music out through the rca coaxial output of the 002. I just want to send my music to an external cd burner. The song is done at 16bit 44. Where are the settings in protools 7 at.

17th April 2006	#3
nevusmusic Gear nut Joined: Mar 2006 Posts: 108 Thread Starter	sorry!! I have the correct cables I have a coaxial cable going from my 002 to my cd burner. I'm not getting any audio. The tracks are output also to the digital out. Is there something in protools 7 that I have to set??

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Digi 002 Control Surface vs Digi Control 8 + 002 Rack ?	bjm007	Music computers	25	17th September 2006 06:46 PM
Firewire Interface Help Needed, i88x, motu, 002, etc.	tubeman	So much gear, so little time!	7	8th January 2006 06:18 AM
Preamp going into 002	blakehavard	High end	6	3rd November 2004 10:02 PM

17th April 2006	#2
ShamansDream Gear addict Joined: Feb 2006 Posts: 392	Ummmm... Those are not RCA outputs Those are SPDIF which is a digital stereo signal; one pair out and one pair in. What you need is an adapter cable that can take one of the output pair and plug that directly into your recorder.

17th April 2006	#4
Tizzo Gear interested Joined: Feb 2006 Posts: 12	Acording to my I/O setup for LE outputs B 1-2 are my SPDIF outputs, I'm assuming yours would be the same. Change your master fader's output from A 1-2 to B 1-2. If that doesn't work take a look at your I/O setups (located under the "setups" pull down menu to check your SPDIF output. Hope this helps!