Problem with my ADAT connection in Pro Tools....I think...!

True North · 22nd March 2006

OK so here the deal.

I have a Digi002 hooked up to a Rosetta 800

I'm trying to record today and I notice I am not getting anything through the channel that is connected to ADAT1 - which is channel 1 of my API 3124.

I do some testing - switch mics, switch cables etc....and I can get signal into the mic pre (according to the Leds - hey I knew they were there for a reason).

ADAT connections 2 through 8 are all working fine - I can get signal to the pre and then into Pro Tools.

Any idea what might be going on - it's late and my brain is fried, thanks

True North · 22nd March 2006

BUMPAGE

joaquin · 31st May 2006

BUMPER 3!
Mine is not working at all. The ADAT in had clicks and pops for a while and then just die!
I'm hoping is related to the power harness bug...I'll reopen it pretty soon, but if someone has an Idea....Thanks!

RedWallStudio · 31st May 2006

First you need to make sure you are getting signal from your pre to the rosetta.. you need to connect your D-sub to something else and verify signal.

If you are getting signal, and If it is just one channel (1) that is bad, I doubt it is your optical connector... but you can try changing it. Those are like a garden hose, you bend them and it cuts off the signal.

Also, and Im doing this from memory, but I think either the Rosetta or the LE box has a second set of ADAT connections (I think its the rosetta), try switching them.

I had to send my Rosetta in to Apogee already once... 200.00 for them to open it up i think.

22nd March 2006	#1
True North Lives for gear Joined: Sep 2005 Location: Richmond Hill, Ontario (Canada) Posts: 3,213 Thread Starter	Problem with my ADAT connection in Pro Tools....I think...! OK so here the deal. I have a Digi002 hooked up to a Rosetta 800 I'm trying to record today and I notice I am not getting anything through the channel that is connected to ADAT1 - which is channel 1 of my API 3124. I do some testing - switch mics, switch cables etc....and I can get signal into the mic pre (according to the Leds - hey I knew they were there for a reason). ADAT connections 2 through 8 are all working fine - I can get signal to the pre and then into Pro Tools. Any idea what might be going on - it's late and my brain is fried, thanks __________________ "In the time of chimpanzees I was a monkey" - Beck, Loser "I do use compressors/limiters but not for controlling dynamics, I use EQ for that!" Jp22 (damn I miss him) "Education is a progressive discovery of our own ignorance." -- Will Durant, historian (1885-1981) "I try to get a boom out of the bass drum, in one of my albums, my CD, boom, I try to get that big boom, I could not get a big boom, I paid bucks, and could not get the boom" - Recording Expert, Tad Donley

31st May 2006	#3
joaquin Lives for gear Joined: Sep 2004 Location: CHILE-Miami Posts: 1,199	BUMPER 3! Mine is not working at all. The ADAT in had clicks and pops for a while and then just die! I'm hoping is related to the power harness bug...I'll reopen it pretty soon, but if someone has an Idea....Thanks! __________________ My studio, is like a womb...It's so freaking comfortable!! Cheers......................Joaquin. www.youtube.com/kzkrecords www.kzkrecords.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Adat Converters with Pro Tools	M2E	Music computers	8	23rd June 2006 06:23 PM
Pro Tools Plug in problem, help me!	cap217	So much gear, so little time!	2	22nd June 2006 02:15 AM
Pro Tools HD bouce problem !!!	Frankovitchy	High end	9	1st June 2006 12:04 AM
Problems with Line6 POD xt Pro and AES/EBU Connection to Pro Tools HD	Andi Rauscher	So much gear, so little time!	7	8th April 2006 11:56 PM
Pro tools problem - Please help!	Gregg	So much gear, so little time!	9	6th January 2006 12:28 AM

31st May 2006	#4
RedWallStudio Lives for gear Joined: May 2006 Location: Chicago Posts: 974	First you need to make sure you are getting signal from your pre to the rosetta.. you need to connect your D-sub to something else and verify signal. If you are getting signal, and If it is just one channel (1) that is bad, I doubt it is your optical connector... but you can try changing it. Those are like a garden hose, you bend them and it cuts off the signal. Also, and Im doing this from memory, but I think either the Rosetta or the LE box has a second set of ADAT connections (I think its the rosetta), try switching them. I had to send my Rosetta in to Apogee already once... 200.00 for them to open it up i think.