Problem syncing protools to logic!

DaveC · 13th December 2005

Since I was able to sync logic to protools, I wondered if I could do it the other way around;
I wanted to have logic (pc) as the master and protools (mac) as a slave.
I use a 4x4 Midisport and I connected the midi-out from the pc to the midi-in on the midisport so the midisport can receive mtc.
I've checked all my settings in both sequencers but I only get protools to run if I press play in logic, so now only protools is playing and nothing happens in logic.

help!

jonnyclueless · 13th December 2005

THat's kind of tough one to answer on a forum. Too many possible prameters and things to check. Without being there at the setup to ook and poke around, it's gonna be tough for anyone to give an answer. But hopefully someone will.

13th December 2005	#1
DaveC Lives for gear Joined: Nov 2003 Location: Netherlands Posts: 640 Thread Starter	Problem syncing protools to logic! Since I was able to sync logic to protools, I wondered if I could do it the other way around; I wanted to have logic (pc) as the master and protools (mac) as a slave. I use a 4x4 Midisport and I connected the midi-out from the pc to the midi-in on the midisport so the midisport can receive mtc. I've checked all my settings in both sequencers but I only get protools to run if I press play in logic, so now only protools is playing and nothing happens in logic. help!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
I need help syncing protools with an mpc	Royilltee@yahoo	Rap + Hip Hop engineering & production	21	19th November 2008 02:09 PM
Help!! syncing a StuderA827 with Protools	soundfarm	High end	39	7th August 2006 06:49 PM
Locking/Syncing up ProTools	vanZed	Remote Possibilities in Acoustic Music & Location Recording	11	21st July 2005 10:55 AM
Syncing protools and cubase	INDECISIVE_2000	Music computers	5	24th March 2005 02:40 AM
Syncing two sources in ProTools...	joeshambro	So much gear, so little time!	3	18th February 2004 06:08 PM

13th December 2005	#2
jonnyclueless Lives for gear Joined: Aug 2004 Location: Los Angeles Posts: 799	THat's kind of tough one to answer on a forum. Too many possible prameters and things to check. Without being there at the setup to ook and poke around, it's gonna be tough for anyone to give an answer. But hopefully someone will.