Headphone outs on Profire 2626

bulls hit · 4th August 2009

Just plugged in my new 2626 and all going well so far, except I can't get anything from either of the two headphone outputs. If I crank the level of the first headphone out up full, I can hear a vague sound in the distance that may resemble music in some form but I can't be sure. The two headphone outs appear to be set to Mixer Out (1st) and Software Return 3/4 (2nd) in the control panel. Monitors are out of Outs 1/2.

Can anyone with the 2626 shed some light that might help the situation? Hopefully there's a setting I've missed. Or maybe I've got two dud outs (ow)..

Murton · 4th August 2009

Software 1&2 are usually the main stereo output of most programs, set the level in the DSP Mixer and then set the headphone output (1&2) to Mixer Out and then make the Master Volume Knob not effect 1&2, or do it the other way around, software 1&2 to output/headphone 1 and then Mixer Out into #&4/headphone 2.

It all works quite well for me, make sure you have the sample rate set correctly and the input order correct.

RTR · 4th August 2009

Quote:

Originally Posted by Murton

Software 1&2 are usually the main stereo output of most programs, set the level in the DSP Mixer and then set the headphone output (1&2) to Mixer Out and then make the Master Volume Knob not effect 1&2, or do it the other way around, software 1&2 to output/headphone 1 and then Mixer Out into #&4/headphone 2.

It all works quite well for me, make sure you have the sample rate set correctly and the input order correct.

+1..when you are done I would name SW 1&2 ,Head phones 1 &2, it can get confusing cuz the mixer never changes..I also UN-check everything in the Settings "Master volume knob" except 7-8..I use 7-b strait to my power amp for my monitors..that way the master volume knob on the front only controls my monitors! It took me a while to get used to that mixer..I kinda wish it was not there, I can do it easier in PT

bulls hit · 5th August 2009

Excellent, thanks guys. I moved my monitors to 7 & 8, unchecked 1 & 2 in the "Master volume knob" setting and now I've got phones.

Not particularly intuitive, but I got there in the. Thanks again

4th August 2009	#1
bulls hit Gear addict Joined: Feb 2008 Posts: 461 Thread Starter	Headphone outs on Profire 2626 Just plugged in my new 2626 and all going well so far, except I can't get anything from either of the two headphone outputs. If I crank the level of the first headphone out up full, I can hear a vague sound in the distance that may resemble music in some form but I can't be sure. The two headphone outs appear to be set to Mixer Out (1st) and Software Return 3/4 (2nd) in the control panel. Monitors are out of Outs 1/2. Can anyone with the 2626 shed some light that might help the situation? Hopefully there's a setting I've missed. Or maybe I've got two dud outs (ow).. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
ProFire 2626	T.Johannsson	So much gear, so little time!	1158	23rd June 2011 09:38 AM
Anybody use a profire 2626 with an 002r?	ckreon	Low End Theory	22	17th March 2010 06:39 PM
profire 2626 as DI thru	powlow	Low End Theory	3	3rd June 2009 04:55 PM
profire 2626 headphone amp gain?	aleatoric	So much gear, so little time!	2	6th January 2009 05:50 PM
Using a Profire 2626?	naethoven	So much gear, so little time!	4	30th September 2008 01:01 AM

4th August 2009	#2
Murton Gear maniac Joined: Feb 2009 Posts: 297	Software 1&2 are usually the main stereo output of most programs, set the level in the DSP Mixer and then set the headphone output (1&2) to Mixer Out and then make the Master Volume Knob not effect 1&2, or do it the other way around, software 1&2 to output/headphone 1 and then Mixer Out into #&4/headphone 2. It all works quite well for me, make sure you have the sample rate set correctly and the input order correct.

5th August 2009	#4
bulls hit Gear addict Joined: Feb 2008 Posts: 461 Thread Starter	Excellent, thanks guys. I moved my monitors to 7 & 8, unchecked 1 & 2 in the "Master volume knob" setting and now I've got phones. Not particularly intuitive, but I got there in the. Thanks again