All Advertisers
| All Advertisers |
| Member Services Directory | Classifieds | Reviews | Jobs | Deal Zone | Merchandise | Marketplace | Books, DVDs & Gadgets | Video Vault | Tips & Techniques |
| |||||||
 New Reply | Thread Tools | Search this Thread |
15th September 2004
| #1 |
| Gear maniac  Join Date: Sep 2004 Location: Manchester, UK
Posts: 194
Thread Starter | PC Motherboards for ProTools HD3 Accel We're about to add an HD3 Accel setup to our studio, running on PC. I'm trying to get some information on which motherboards people are successfully using for this kind of rig. In particular, has anybody had any luck with a Supermicro X5DA8 or other motherboards using the Intel E7505 chipset. This chipset is used on the two Digidesign certified systems, but I've seen at least one person have problems with it on a custom-built system. If anybody has any input, advice, assistance, I'd be extremely grateful. Many thanks Jules |
|  |
|
15th September 2004
| #3 |
| Gear maniac Join Date: Sep 2004 Location: Manchester, UK
Posts: 194
Thread Starter | Thanks REMO There are a few, but not as much information as I'd hoped. I kind of thought there might be some kind of list of motherboards which people had had success with, but so far I've not found it. Thanks again Jules |
|
| |
|
18th September 2004
| #4 |
| Gear addict Join Date: Mar 2003 Location: Los Angeles
Posts: 349
| Didn't see you ask.. I use an Asus P4C800 Deluxe which works well (as it does for other Accel XP users). Rail
__________________ Recording Engineer |
|
| |
|
18th September 2004
| #5 |
| Gear maniac Join Date: Sep 2004 Location: Manchester, UK
Posts: 194
Thread Starter | Thanks Rail I've seen others mention that board. If we fail with our Supermicro board (can't hurt to try), it looks like that's the best option. Thanks again Jules |
|
| |
