Pro Tool HD, Big Ben & Rosetta 200

[dabhoys]

Hi there,

Just having a slight problem with this set up. Running a pro tools HD with a 192, also a Big Ben and a Rosetta 200.

I have the the big ben WC connected to the input of the 192 and 200. The 200 is then connected to the 192 via AES/EBU

Everything works fine with the 192 set to internal. But once I set the 192 to EXT I loose the first 8 audio out on Pro Tools when playing back.

Its really weird. I've been playing around with it trying to get it to work. Can anyone see a problem in my approach.

Would really appreciate any help....

[zakco]

I have a 192, lynx aurora and a big ben and i've had similar problems with the 192. Sometimes it just won't lock to the big ben. The hardware setup in PT says it's clocked ext but the front panel of the 192 shows internal. A complete system shutdown followed by a careful startup routine (big ben>192>Mac) usually fixes this for me. On a couple of occasions I've had to do this twice before it would lock.

192s are definitely a bit iffy when it comes to ext clocking...

Good luck,

-Z-