Pro Tools LE, importing tracks recorded at 96kHZ.

_nate_ · 15th November 2007

I own an mbox 2 and tried to import audio tracks that where recorded on a HD system at 96kHz but once I imported them they play at a much slower speed. Is there anyway I can import them into my system at the right speed?
Help would be much appreciated, and sorry if this is noob question.

gdoubleyou · 15th November 2007

Unless you can set your hardware to 96K you're out of luck.

dwaynedelario · 16th November 2007

You're not out of luck. Open a blank session and copy+convert them using import session data. Voila. Yes you will be downconverting but if you want to work in LE then...

...when using import session data make sure you have selected "Apply SRC" (on the right side) and set the source sample rate to 96k. ALso make sure you have files set to be copied in (not to link).

-Joe

beau_mckee · 17th November 2007

96khz works fine in PTLE but i dont think the mbox1 and 2 can handle 96khz, max is 48khz because its running through usb 1. so when you import, you have to convert the tracks down to 48khz.

15th November 2007	#1
_nate_ Gear interested Joined: Mar 2007 Posts: 7 Thread Starter	Pro Tools LE, importing tracks recorded at 96kHZ. I own an mbox 2 and tried to import audio tracks that where recorded on a HD system at 96kHz but once I imported them they play at a much slower speed. Is there anyway I can import them into my system at the right speed? Help would be much appreciated, and sorry if this is noob question.

17th November 2007	#4
beau_mckee Lives for gear Joined: Oct 2006 Location: Melbourne, Australia Posts: 869 1 Review written	96khz works fine in PTLE but i dont think the mbox1 and 2 can handle 96khz, max is 48khz because its running through usb 1. so when you import, you have to convert the tracks down to 48khz. __________________ www.beaumckee.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
PRO TOOLS 7.3 + REASON (REWIRE); IMPORTING SESSIONS FROM NEWER VERSION OF PRO TOOLS	woongsae	Music computers	2	29th January 2007 06:05 PM
Importing Pro Tools files into Cubase	guitarwiz800	Music computers	11	11th December 2006 11:04 PM
HELP! Having trouble importing Quicktimes into Pro Tools 6.4.1 Mix...	TVR	Music computers	10	15th September 2006 08:27 PM
Methods for dealing with vocal pops already recorded in Pro Tools	santo	Music computers	5	1st September 2006 08:49 AM
Importing CD Tracks in DP 4.6	newrob1	Music computers	5	23rd May 2006 08:01 PM

15th November 2007	#2
gdoubleyou Lives for gear Joined: Oct 2007 Posts: 635	Unless you can set your hardware to 96K you're out of luck.

16th November 2007	#3
dwaynedelario Gear maniac Joined: Jun 2006 Location: Los Angeles Posts: 205	You're not out of luck. Open a blank session and copy+convert them using import session data. Voila. Yes you will be downconverting but if you want to work in LE then... ...when using import session data make sure you have selected "Apply SRC" (on the right side) and set the source sample rate to 96k. ALso make sure you have files set to be copied in (not to link). -Joe