motu 24 i/o sync problem?I have installed the Motu pci 424 card and 24 i/o I ordered

upperlip · 19th May 2007

I have installed the Motu pci 424 card and 24 i/o I ordered some weeks ago (I was waiting for my Trident 8t to arrive. It did yesterday). I work with PC, windows xp.

I have some problems with it:

- Firts of all, it was very difficult to get the 24 i/o synced with the PCI card. The manual says to use Audiowire 1 if only 1 device is attached. But I only succeed in getting it synced using audiowire 3.

- There is a distortion on all audio played. That is the case in Cubase, wavelab and Windows audio player. I suppose it is a sync problem? There's the typical fireplace-alike sounds in my cubase softwaremonitoring. I alreaddy downloaded the latest drivers at the motu site.

Are these problems familiar to someone?

Hard2Hear · 21st May 2007

try it in a different pci slot and reload the drivers.

lionheart · 21st May 2007

This sounds like typical IRQ conflict!! As mentioned in the post above me, try another pci slot!! I have the motu 24io my self, it works lika a charm and never had this problem:-) Good luck!!

19th May 2007	#1
upperlip Gear interested Join Date: May 2007 Location: Belgium Posts: 5 Thread Starter	motu 24 i/o sync problem?I have installed the Motu pci 424 card and 24 i/o I ordered I have installed the Motu pci 424 card and 24 i/o I ordered some weeks ago (I was waiting for my Trident 8t to arrive. It did yesterday). I work with PC, windows xp. I have some problems with it: - Firts of all, it was very difficult to get the 24 i/o synced with the PCI card. The manual says to use Audiowire 1 if only 1 device is attached. But I only succeed in getting it synced using audiowire 3. - There is a distortion on all audio played. That is the case in Cubase, wavelab and Windows audio player. I suppose it is a sync problem? There's the typical fireplace-alike sounds in my cubase softwaremonitoring. I alreaddy downloaded the latest drivers at the motu site. Are these problems familiar to someone?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
MOTU 24i/o sync problem?	upperlip	So much gear, so little time!	1	19th May 2007 07:11 PM
Using a PCI-based card(MOTU 2408 mk2) simultaneously with a FW card(MOTU 828 mk2)?	jebjerome	Music computers	3	15th August 2006 05:20 AM
best way to sync RME and motu?	DaveSullivan	High end	1	31st May 2006 12:09 AM

21st May 2007	#2
Hard2Hear Gear nut Join Date: May 2005 Location: OH/KY/TN Posts: 90	try it in a different pci slot and reload the drivers.

21st May 2007	#3
lionheart Gear addict Join Date: Aug 2005 Location: Oslo, Norway Posts: 405	This sounds like typical IRQ conflict!! As mentioned in the post above me, try another pci slot!! I have the motu 24io my self, it works lika a charm and never had this problem:-) Good luck!!