Please Help! Expansion Chassis Failure
nicolasixxx
Thread Starter
#1
16th May 2007
Old 16th May 2007
  #1
Gear nut
 

Thread Starter
Please Help! Expansion Chassis Failure

I have a 7 slot, 32 bit Digi expansion chassis (SBS model) with 1 core, 1 accel, 5 process cards and I'm running PT 7.1 on a G5 1.8dp (gen1).

Pro Tools crashed yesterday with a "DAE Error 4". On restart, Pro Tools was unable to find hardware. Also, the 192I/O's have the orange rather than green status ring around the power button when everything is on.

I've put the core card in the G5 in place of the pci host adaptor and Pro Tools sees it fine. I've also taken all the cards except the core card out of the chassis and hooked things up and it's the unable to find and orange ring on the 192's situation.

The fan in the chassis still runs, but it seems like the cards aren't getting any power (shown by the orange rings on the 192's I think).

I've searched the DUC and it seems like chassis failures are very rare.

Any ideas????? Work is piling up over here!

Nic
#2
1st August 2008
Old 1st August 2008
  #2
32 bit expansion

I have an SBS 7 slot 32 bit chasis that I just got. I'm running HD3 Accel on a dual 2.7 G5. Is there any problem running the 64 bit Accel cards on a 32 bit expansion chassis?
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Similar Threads
Thread
Thread Starter / Forum
Replies
octatonic / So much gear, so little time!
1
shorefire / Music Computers
0
Onan / Music Computers
9
7rojo7 / Music Computers
2

Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read

SEO by vBSEO ©2011, Crawlability, Inc.