How can I get output from my PT/HD/Apogee setup?

DeathMonkey · 11th January 2007

OK. I am running an accel2 setup with protools HD (7.3) on a Mac Pro. I have an AD16X and a Rosetta 800, each with X-HD cards. The AD16x is plugged into the Core card, the Rosetta into the accel card (this so far is the only way to get them each to register as 192s - daisy chaining them doesn't seem to work).

I can get audio IN to a track in PT/HD, but I can't get audio OUT to my powered monitors.

I have a digisnake running out of the Analog Out of the Rosetta, with line 1 and 2 going directly into the backs of my monitors (JBL LSR428s). Hardware setup in PT/HD is set to default, as are both units, as per the recommendations.

Any ideas why I have no audio output?

Tibbon · 11th January 2007

I'd use a scope to check your outputs, just in case your power amp is blown and for some reason that isn't working. Verify that you're getting signal out of the snake.

Double check the...

snake
interface
ALL connections
software settings
etc..

11th January 2007	#1
DeathMonkey Lives for gear Joined: Nov 2006 Posts: 832 Thread Starter	How can I get output from my PT/HD/Apogee setup? OK. I am running an accel2 setup with protools HD (7.3) on a Mac Pro. I have an AD16X and a Rosetta 800, each with X-HD cards. The AD16x is plugged into the Core card, the Rosetta into the accel card (this so far is the only way to get them each to register as 192s - daisy chaining them doesn't seem to work). I can get audio IN to a track in PT/HD, but I can't get audio OUT to my powered monitors. I have a digisnake running out of the Analog Out of the Rosetta, with line 1 and 2 going directly into the backs of my monitors (JBL LSR428s). Hardware setup in PT/HD is set to default, as are both units, as per the recommendations. Any ideas why I have no audio output? __________________ Screaming Monkey Studio - Seattle, WA teebes on Soundclick www.MySpace.com/djteebalicious www.MySpace.com/thissoilisdiseased

11th January 2007	#2
Tibbon Lives for gear Joined: Jul 2004 Location: Boston/MA Posts: 4,780 2 Reviews written	I'd use a scope to check your outputs, just in case your power amp is blown and for some reason that isn't working. Verify that you're getting signal out of the snake. Double check the... snake interface ALL connections software settings etc.. __________________ David Fisher (aka tibbon) What is Noise, Blog (DIY, gear, tech, etc) Follow me on Twitter imVOX- Voice for Gamers WTB: Moog Theremin Signature Edition

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Setup issue regarding Digi 192 and Apogee DA16x Setup issue:Digi192 and Apogee DA16x	Redsandblu	Music computers	4	19th February 2010 11:58 PM
Apogee Output Levels	tedcrop	High end	1	19th August 2006 01:05 AM
Apogee Rosetta A/D 96k cannot output on SPDIF?	wayne mox	So much gear, so little time!	0	23rd May 2006 06:39 PM
Apogee Rosetta 200 D/A Output to Monitors	garymusic	So much gear, so little time!	5	1st February 2006 07:21 PM
Apogee MiniDAC output impedance	Gerardo	So much gear, so little time!	0	25th October 2004 05:43 PM