aaaaaaaaAAAAARRRRRRRRGH!!!!!

raal · 18th June 2008, 08:28 AM

we had a major mishap in the studio yesterday evening - the lights went out and came back immediately with a brownout and a bunch of gear went south. we have everything regulated, and from there, to a couple of hefty UPS units. i can't understand what failed but i've had this place about 20 years and this has never happened.

our tech and electrician arrive tomorrow morning to assess the damage. we've always been aware of mexico's substandard electrical power, and i thought we were well covered, so this is a very unpleasant surprise.

was tracking a band we're producing for Sony/BMG so there was alot of stuff on... 4 Pultecs, LA2, 2 X Neve 1081, 4 X Neve 1272s, 2 X Summit EQs, Chandler Zener, Fatso, Inward Connections TSL3, 8 X API 312s, Avalon M22s, 2 XShadowhills Gamas, AKG C24, 2 X neumann KM 53, 2 X 582s, ribbons, dynamics, Barefoots + S3As, etc.... i'm sure you get the picture. the fuses were shot on most of the gear, so God willing we can resolve the majority of this with fuses but i don't even want to try turning anything on til the techs arrive, and even less want to think about the worst case scenario.

at any rate i know at least one of the Barefoots is ok. the other one didn't turn back on so i'm afraid that one and one S3A may have bitten the bullet. i'll know for certain tomorrow...

don't know what kind of karma i'm paying but wow...

anyway can't wait to get through a full session with the Barefoots... they sure sounded stellar the little time i got to enjoy them. :( .... man, i can't even give a rave review here, not that Thomas an Co. need it... wouldn't be fair as i haven't had the time to mix something and take it out of the room yet, but i can say i'm well acquainted with the room, and i could tell immediately i was hearing about as close a representation of what was going on as i ever had...

anyway sorry for the rant but man.... do i at least get moan of the year award?

alexstringer · 18th June 2008, 03:51 PM

OH MAN!
I feel for you Bro...
That's the worst thing that can happen after getting robbed....
I hope you got a good insurance....

delcosmos · 18th June 2008, 04:14 PM

I'm so sorry bro, the good news is that you have a really talented tech, so don't worry, in the end, it's only fuses, tubes, caps or PSU's, everything could be repaired. The "downside" is time and money, but nothing that a royalty's advance can't fix

Best regards.

delcosmos.

raal · 19th June 2008, 05:03 AM

some good news!

it seems the only thing that went on one MM27 was the power supply, and same with one S3A.

our tech is going downtown tomorrow to hunt for the exact parts for the PSUs. if he finds them he'll be working on the speakers on saturday.

...and all the other gear fired up and measured fine after installing new fuses, and a couple of resistor replacements on some of the PSUs!!!

the electrical guy is going through the installation with a fine toothed comb to make sure all is ok, so we may be able to get back to work as early as monday!

but i don't want to sound too cocky yet, we still have to go through all the mics and run audio through everything, but things could have been alot worse, thank God. thanks alot for your moral support guys.

and thank you armando for offering a strong arm in case we couldn't get back up... friends like you aren't easy to find.

Kris · 19th June 2008, 01:38 PM

Quote:

Originally Posted by alexstringer

OH MAN!
I feel for you Bro...
That's the worst thing that can happen after getting robbed....
I hope you got a good insurance....

No doubt!

Glad it's working out for you.

Oroz · 20th June 2008, 06:49 PM

Quote:

Originally Posted by raal

some good news!

it seems the only thing that went on one MM27 was the power supply, and same with one S3A.

our tech is going downtown tomorrow to hunt for the exact parts for the PSUs. if he finds them he'll be working on the speakers on saturday.

...and all the other gear fired up and measured fine after installing new fuses, and a couple of resistor replacements on some of the PSUs!!!

the electrical guy is going through the installation with a fine toothed comb to make sure all is ok, so we may be able to get back to work as early as monday!

Great news Raal

! It was hard just to read your post so I can't imagine what you went through but I'm really happy to hear that your equipment is OK.

The best of lucks.

raal · 20th June 2008, 06:51 PM

thanks bro! will let you guys know when we're back up. just want to make sure the AC is 100%. looks good so far though.

Dave Peck · 21st June 2008, 12:35 AM

Quote:

Originally Posted by raal

we had a major mishap in the studio yesterday evening - the lights went out and came back immediately with a brownout and a bunch of gear went south. we have everything regulated, and from there, to a couple of hefty UPS units.

Glad to hear that the damage was minimal! But it seems like you ought to get in touch with the folks who provided the UPS and the folks who build the gear that has supposedly been doing the "regulating". I bet it has already occurred to you that this scenario is precisely what this stuff is supposed to protect you from. Regardless of what happened with the AC, that stuff should have at least shut down the power safely and protected your gear. Somebody's got some 'spainin to do.

Animus · 21st June 2008, 02:00 AM

I believe some of those UPS companies have a warranty/guarantee to cover equipment repairs/replacement if something goes awry and the UPS was at fault. Of course saying and doing are too separate things.

raal · 21st June 2008, 05:05 AM

thanks dave and animus. will definitely look into seeing who to blame... once we get up and running, which is top priority now.

18th June 2008, 08:28 AM	#1
raal Lives for gear Join Date: Dec 2004 Location: mexico Posts: 3,519	aaaaaaaaAAAAARRRRRRRRGH!!!!! we had a major mishap in the studio yesterday evening - the lights went out and came back immediately with a brownout and a bunch of gear went south. we have everything regulated, and from there, to a couple of hefty UPS units. i can't understand what failed but i've had this place about 20 years and this has never happened. our tech and electrician arrive tomorrow morning to assess the damage. we've always been aware of mexico's substandard electrical power, and i thought we were well covered, so this is a very unpleasant surprise. was tracking a band we're producing for Sony/BMG so there was alot of stuff on... 4 Pultecs, LA2, 2 X Neve 1081, 4 X Neve 1272s, 2 X Summit EQs, Chandler Zener, Fatso, Inward Connections TSL3, 8 X API 312s, Avalon M22s, 2 XShadowhills Gamas, AKG C24, 2 X neumann KM 53, 2 X 582s, ribbons, dynamics, Barefoots + S3As, etc.... i'm sure you get the picture. the fuses were shot on most of the gear, so God willing we can resolve the majority of this with fuses but i don't even want to try turning anything on til the techs arrive, and even less want to think about the worst case scenario. at any rate i know at least one of the Barefoots is ok. the other one didn't turn back on so i'm afraid that one and one S3A may have bitten the bullet. i'll know for certain tomorrow... don't know what kind of karma i'm paying but wow... anyway can't wait to get through a full session with the Barefoots... they sure sounded stellar the little time i got to enjoy them. :( .... man, i can't even give a rave review here, not that Thomas an Co. need it... wouldn't be fair as i haven't had the time to mix something and take it out of the room yet, but i can say i'm well acquainted with the room, and i could tell immediately i was hearing about as close a representation of what was going on as i ever had... anyway sorry for the rant but man.... do i at least get moan of the year award?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

18th June 2008, 03:51 PM	#2
alexstringer Lives for gear Join Date: Mar 2005 Location: Brooklyn Posts: 1,146	OH MAN! I feel for you Bro... That's the worst thing that can happen after getting robbed.... I hope you got a good insurance....

18th June 2008, 04:14 PM	#3
delcosmos Lives for gear Join Date: May 2004 Location: COSMOS Posts: 1,315	I'm so sorry bro, the good news is that you have a really talented tech, so don't worry, in the end, it's only fuses, tubes, caps or PSU's, everything could be repaired. The "downside" is time and money, but nothing that a royalty's advance can't fix Best regards. delcosmos.

19th June 2008, 05:03 AM	#4
raal Lives for gear Join Date: Dec 2004 Location: mexico Posts: 3,519	some good news! it seems the only thing that went on one MM27 was the power supply, and same with one S3A. our tech is going downtown tomorrow to hunt for the exact parts for the PSUs. if he finds them he'll be working on the speakers on saturday. ...and all the other gear fired up and measured fine after installing new fuses, and a couple of resistor replacements on some of the PSUs!!! the electrical guy is going through the installation with a fine toothed comb to make sure all is ok, so we may be able to get back to work as early as monday! but i don't want to sound too cocky yet, we still have to go through all the mics and run audio through everything, but things could have been alot worse, thank God. thanks alot for your moral support guys. and thank you armando for offering a strong arm in case we couldn't get back up... friends like you aren't easy to find.

20th June 2008, 06:51 PM	#7
raal Lives for gear Join Date: Dec 2004 Location: mexico Posts: 3,519	thanks bro! will let you guys know when we're back up. just want to make sure the AC is 100%. looks good so far though.

21st June 2008, 02:00 AM	#9
Animus Lives for gear Join Date: Feb 2005 Location: Durham, NC USA Posts: 1,576	I believe some of those UPS companies have a warranty/guarantee to cover equipment repairs/replacement if something goes awry and the UPS was at fault. Of course saying and doing are too separate things.

21st June 2008, 05:05 AM	#10
raal Lives for gear Join Date: Dec 2004 Location: mexico Posts: 3,519	thanks dave and animus. will definitely look into seeing who to blame... once we get up and running, which is top priority now.