Matt Syson

Matt,

I've really enjoyed reading your posts on the Amek Big. I've been seriously considering purchasing one that is on ebay (Amek Big by Langley Recording Console | eBay). We really need to extend our studio to a console of that size with our limited budget. It seems to look clean, but it doesn't include the computer or SuperTrue Automation software... Would I just be outta luck on that one? It seems to be priced right, but I'd like to use the automation and virtual dynamics as I'll be tracking and mixing through the console... Any insight would be extremely helpful.. Thank you!

Is there a factory reset that I can do to let amek 56?

Hi Matt. I hav an amak recall 56 and I'm having trouble with the master output levels. It seems that the matrix is sending some kind of level even though it's not in use. I have to move some knobs from the matrix master channel to the right so signal can pass but is all out off level. Can you help me somehow thank you. My email is Harry3@gmail.com

one more question matt, if i bypass to opamp from pin 5 - 8, is i necassary to do rail to rail bypass at the opamps?

hy matt, i recapped some channels and replaced the opamps with ne 5534 on the channelstrips. if i got your post right i shuld bypass the opamps with caps from pin 5 to pin 8, is there polarity that i should take care of? is this the right cap for the bypass: http://www.conrad.de/ce/de/product/4...OP_AREA_17435?

thanks regards Tarkan

Hi Matt,
I appreciate you posting your insights in the geekslutz forum on gearslutz. I made use of your "floating outputs are bad engineering practice" remark and updated my monitor switcher outputs with terminating resistors. Thanks for that!

I don't know if it is proper decorum, but could I ask you to please revisit the thread and read and comment on my post? ( last post in the thread). I need some help finishing this circuit and I have a feeling you will know the answers. The thread link is below. Thanks so much for your time.

http://www.gearslutz.com/board/geeks...r-project.html