Dan Kennedy

Thanks a ton Dan. I'll have to give Mr. Dooley a call.

BTW, I am still getting great use out of the Great River MP boards I bought from you about ten years ago.

Cheers

Kris

Hi Alkor, sorry I didn't see this before.

To operate on 240 the fuse should be changed, it should be 0.4a slo-blow for 240vac.

The little card must be turned over so 220 shows in the little window. Otherwise you'll blow the fuse and probably blow up the supply.

The fuse and the voltage select card are all part of the power entry module, which is the plastic assembly the power cord plugs into. Below the cord socket you'll see a
small plastic part with a window, in the window will be the text "110". This small part pries out from the rest of the module, with the select card and the fuse attached.

Dan Kennedy
Great River Electronics

hi dan,
im now a proud owner of an eq2nv.
now heres my questions:
i want to switch, from120V to 240V.
the user´s guide is a bit confusing.
it says the preamp is shipped to operate @ 110V, to operate on 240V change the fuse
1. where is the fuse located ? which fuse should i use for 240V?
the picture in the user guide sasy 0,2A slo-bow, on the rear panel of the unit syas 0,4A slo-bow.
then, the guide resumes:
then turn the v-select card over an replace the fuse into the NV-eq.
is changing the fuse the only thing i have to do to oparate the eq2nv an 240V?