Mastering Inferface - Page 2

MattGray · 29th May 2007

I am looking into the possibility of running a M-Audio Profire Lightbridge with an RME-ADI-4DD to convert ADAT S/MUX to AES-EBU to run 24bit 96kHz to & from ProTools LE M-Powered software. Has anyone had any experience with ADAT S/MUX at 24-96? Any clocking problems or potential problems that I should be aware of?

Matt

Implicit · 30th May 2007

Quote:

Originally Posted by OJS

I am thinking about switching from adat to AES. my current gear is equipped with AES.

Is there a difference in quality between the RME HDSP AES-32 and the Lynx AES-16? Are there other options on the market? No firewire, no AD/DA, just a digital AES interface......

Thanks,

OJ

Totalmix, DIGICheck, and the Meter Bridge that ship with the RME could be deciding factors. Both Lynx and RME make great stuff...

29th May 2007	#31
MattGray Lives for gear Join Date: Aug 2005 Location: Brisbane, Australia Posts: 1,225 Verified Member	I am looking into the possibility of running a M-Audio Profire Lightbridge with an RME-ADI-4DD to convert ADAT S/MUX to AES-EBU to run 24bit 96kHz to & from ProTools LE M-Powered software. Has anyone had any experience with ADAT S/MUX at 24-96? Any clocking problems or potential problems that I should be aware of? Matt __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
mastering in OZ	noequipment	High end	40	4th October 2010 08:15 PM
Mastering - does use of signal crush maximizers make mastering compression - redunda	Jules	Mastering forum	15	30th August 2005 04:55 PM
What exactly is mastering	Peyton	Low End Theory	24	22nd August 2005 02:43 PM
Mastering.	Atari	High end	6	11th July 2005 08:58 AM
Mastering engineers known for mastering movie soundtracks	Autowow	High end	0	26th January 2005 06:05 PM