Monitoring T-Racks in standalone mode

Cruds · 8th November 2009

MacPro Intel / Digi 002 / IK T-Racks Deluxe

Quick question -
My monitors are outputted from the Digi002 interface. Is there a way to set up T-racks monitoring thru the 002 in standalone mode or will it require an additional monitoring interface of some sort? I can currently only monitor the standalone via the headphone out on the Mac chasis.

Any help is greatly appreciated..

Obitheincredible · 8th November 2009

Go into settings and select the audio interface and drivers for it.

8th November 2009	#1
Cruds Gear interested Join Date: Jan 2008 Posts: 7 Thread Starter	Monitoring T-Racks in standalone mode MacPro Intel / Digi 002 / IK T-Racks Deluxe Quick question - My monitors are outputted from the Digi002 interface. Is there a way to set up T-racks monitoring thru the 002 in standalone mode or will it require an additional monitoring interface of some sort? I can currently only monitor the standalone via the headphone out on the Mac chasis. Any help is greatly appreciated..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Old RME Hammerfall used in standalone mode?	davey boy	Music computers	2	4th August 2009 04:10 PM
Multiple standalone Macs with Logic or Daisy chain in 'Units' mode?]	Beermaster	Music computers	0	23rd October 2008 11:29 PM
Ensemble standalone mode	007	Music computers	0	26th July 2008 02:02 AM
Echo Product W/ Standalone ADAT Mode?	jbuehler	Low End Theory	5	14th May 2008 11:47 PM
RME FF800 in standalone mode?	degas	So much gear, so little time!	5	17th September 2007 01:05 PM

8th November 2009	#2
Obitheincredible Lives for gear Join Date: Jul 2008 Location: Salt Lake City, UT Posts: 577	Go into settings and select the audio interface and drivers for it.