Need help with my signal path...

lodge · 19th July 2008

OK, I recently invested in my chain, but am a bit confused about the setup. Any advice would be greatly appreciated.
I have a right now, my chain is Manley mono mic pre--> DIGI002R-->command 8-->HS50Ms, and I need to figure out how to insert my RME ADI-2 that I would like to use for monitoring and tracking (is it possible to do this simultaneously?) I'm a bit confused.

Thanks!
BLW

close/far · 20th July 2008

You have to use the ADAT/Lightpipe connection to slave the RME to the 002. I think under the "options" menu in PT is the "hardware" section. You'll have to select "optical" instead of SPDIF, and then the RME inputs and outputs will become available to you via each channel strip in the mixing section, etc.

lodge · 21st July 2008

so it's not possible to do the same with the SPDIF connection?

close/far · 22nd July 2008

Oh yeah.. you can do the same thing with SPDIF. Just not both at the same time.

19th July 2008	#1
lodge Gear interested Join Date: Jul 2008 Posts: 2 Thread Starter	Need help with my signal path... OK, I recently invested in my chain, but am a bit confused about the setup. Any advice would be greatly appreciated. I have a right now, my chain is Manley mono mic pre--> DIGI002R-->command 8-->HS50Ms, and I need to figure out how to insert my RME ADI-2 that I would like to use for monitoring and tracking (is it possible to do this simultaneously?) I'm a bit confused. Thanks! BLW

21st July 2008	#3
lodge Gear interested Join Date: Jul 2008 Posts: 2 Thread Starter	Thanks, Yawn so it's not possible to do the same with the SPDIF connection?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Transformers in the Signal Path-- how many is enough?	chickencoop	So much gear, so little time!	16	18th January 2008 02:11 AM
Best signal path for HipHop vocals?	B-Muzik	Rap + Hip Hop engineering & production	27	27th November 2007 09:36 PM
the shorter the path the better the signal...	alessio	So much gear, so little time!	2	24th May 2007 06:24 PM
Jingle Producers- Signal path?	Prickstein	Post Production forum!	10	12th September 2005 02:56 AM
Bass Signal Path	rmx16	High end	0	24th July 2002 05:12 PM

20th July 2008	#2
close/far Lives for gear Join Date: Dec 2005 Location: Springfield, MO Posts: 809	You have to use the ADAT/Lightpipe connection to slave the RME to the 002. I think under the "options" menu in PT is the "hardware" section. You'll have to select "optical" instead of SPDIF, and then the RME inputs and outputs will become available to you via each channel strip in the mixing section, etc.

22nd July 2008	#4
close/far Lives for gear Join Date: Dec 2005 Location: Springfield, MO Posts: 809	Oh yeah.. you can do the same thing with SPDIF. Just not both at the same time.