hooking up an apogee AD16 to my 002R?

Tyrone · 16th April 2007, 09:33 PM

Ok this is probably a stupid question which I think I know the answer to but I'm thinking of buying an old AD16 to use with my 002R but I notice on the rear of the AD16 it has four ADAT outputs, 1-8 divided into 1-4 an 1-8 and 9-16 divided from 9-12 and 13-16... but on my 002R I only have ADAT in and out, any one have any experience of this setup and how it works?
cheers

adrianex · 17th April 2007, 01:05 AM

I coul be wrong, but, I think you can only upto 8ch, but I'm not sure

Roc Mixwell · 17th April 2007, 01:27 AM

These separate outputs are for SMUX.
As you know, ADAT is only capable of clock rates up to 48k.

So, SMUX(1) will allow clock rates up to 96k. So if you want to record at say 88.2 or 96k just make sure the dip-switches are set correctly for SMUX and your good.

peace
mixwell

Download the manual for the full layout of how it works.
Apogee Electronics: Support: User's Guides/ Digital Audio Info

Tyrone · 17th April 2007, 10:36 AM

cheers guys I think I'm gonna go for it, seems to offer a great improvement to my current system!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hooking up AD16x to 002r.	C/G	So much gear, so little time!	2	12th April 2007 07:55 PM
Apogee AD16	not_so_new	High end	0	29th January 2005 01:44 AM
My Apogee AD16-X	Riad	High end	39	23rd November 2004 03:59 AM

16th April 2007, 09:33 PM	#1
Tyrone Gear Head Join Date: Dec 2005 Posts: 58	hooking up an apogee AD16 to my 002R? Ok this is probably a stupid question which I think I know the answer to but I'm thinking of buying an old AD16 to use with my 002R but I notice on the rear of the AD16 it has four ADAT outputs, 1-8 divided into 1-4 an 1-8 and 9-16 divided from 9-12 and 13-16... but on my 002R I only have ADAT in and out, any one have any experience of this setup and how it works? cheers

17th April 2007, 01:05 AM	#2
adrianex Lives for gear Join Date: May 2005 Location: Florida Posts: 710	I coul be wrong, but, I think you can only upto 8ch, but I'm not sure __________________ Adrianex (a.k.a DEMORI) www.demori.net www.myspace.com/demorimusic www.soundclick.com/demorimusic

17th April 2007, 01:27 AM	#3
Roc Mixwell Lives for gear Join Date: Dec 2006 Location: Foxboro, MA Posts: 1,899	SMUX I/O These separate outputs are for SMUX. As you know, ADAT is only capable of clock rates up to 48k. So, SMUX(1) will allow clock rates up to 96k. So if you want to record at say 88.2 or 96k just make sure the dip-switches are set correctly for SMUX and your good. peace mixwell Download the manual for the full layout of how it works. Apogee Electronics: Support: User's Guides/ Digital Audio Info __________________ Adam Brass Mercenary Audio adam@mercenary.com ________________ "Any opinions expressed above are worth exactly what you paid for them." Anonymous "Nothing can stop the man with the right mental attitude from achieving his goal; nothing on earth can help the man with the wrong mental attitude." Thomas Jefferson "If I find 10,000 ways something won't work, I haven't failed. I am not discouraged, because every wrong attempt discarded is another step forward. Thomas Edison

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

17th April 2007, 10:36 AM	#4
Tyrone Gear Head Join Date: Dec 2005 Posts: 58	cheers guys I think I'm gonna go for it, seems to offer a great improvement to my current system!