Possibility that the 003 clock will be good?

charleslee · 9th March 2007, 09:20 PM

Hi mates,

I need some opinions while preparing for my LE upgrade..

Currently, my 001 takes clock from my RME ADI-8 PRO (via ADAT optical), before that, my "master clock" was my MOTU DTP - Digital Timepiece (via SPDIF) - I might still need to keep the DTP for pull ups/downs and to control decks..

The other digital device in the room that takes WORD clock is my dbx 386 mic-pre. The DA-88 might be moved to this room too.

When the 003 comes into the picture, should the RME still remain as my Master? or should the RME slave to the 003 this time?

Thanks !

charleslee · 16th March 2007, 11:32 PM

if you've received your 003 ... please verify the clock's quality

Thanks!

DISCERN · 17th March 2007, 12:04 AM

There is only one way to find out and thats to try it for yourself. How can people who buy the 003 tell if the clock is better or worse? They might notice that the conversion has improved, but thats a combination of a lot of things to do with the 003 upgrade. One thing to note is that internal clocks aren't really designed to work as masters for extended setups. Under such loads like you are suggesting and external clock will stuggle. A dedicated master clock is your best bet, like a big ben. That being said, the improvements of buying a master clock for the gear you are using probably won't be anywhere near as beneficial as selling all that gear and upgrading to a Lynx Aurora, Rosetta 800 or even SSL alpha link.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is the Prism ada8 internal clock good enough?	alexstringer	High end	2	10th January 2006 12:35 AM
possibly an impossible possibility?	PaRaNoId	So much gear, so little time!	9	10th August 2004 07:59 AM
Is there a remote possibility of a live DSD/PCM comparison?	Inky Goddess	Remote Possibilities in Acoustic Music & Location Recording	52	25th June 2004 04:46 PM
whats a good buy for word clock	drazzon	So much gear, so little time!	1	6th January 2004 09:27 AM

9th March 2007, 09:20 PM	#1
charleslee Gear maniac Join Date: Jan 2003 Location: Singapore Posts: 197	Possibility that the 003 clock will be good? Hi mates, I need some opinions while preparing for my LE upgrade.. Currently, my 001 takes clock from my RME ADI-8 PRO (via ADAT optical), before that, my "master clock" was my MOTU DTP - Digital Timepiece (via SPDIF) - I might still need to keep the DTP for pull ups/downs and to control decks.. The other digital device in the room that takes WORD clock is my dbx 386 mic-pre. The DA-88 might be moved to this room too. When the 003 comes into the picture, should the RME still remain as my Master? or should the RME slave to the 003 this time? Thanks ! __________________ www.tworooms.com

16th March 2007, 11:32 PM	#2
charleslee Gear maniac Join Date: Jan 2003 Location: Singapore Posts: 197	if you've received your 003 ... if you've received your 003 ... please verify the clock's quality Thanks! __________________ www.tworooms.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

17th March 2007, 12:04 AM	#3
DISCERN Gear addict Join Date: Dec 2006 Posts: 395	There is only one way to find out and thats to try it for yourself. How can people who buy the 003 tell if the clock is better or worse? They might notice that the conversion has improved, but thats a combination of a lot of things to do with the 003 upgrade. One thing to note is that internal clocks aren't really designed to work as masters for extended setups. Under such loads like you are suggesting and external clock will stuggle. A dedicated master clock is your best bet, like a big ben. That being said, the improvements of buying a master clock for the gear you are using probably won't be anywhere near as beneficial as selling all that gear and upgrading to a Lynx Aurora, Rosetta 800 or even SSL alpha link.