![]() | All Advertisers |
| |||||||
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tube Swap For Fender Blues Deville Tweed 410-(microphonic problems too) | Jamingguitarist | Geekslutz forum | 4 | 10th December 2007 08:49 PM |
| Altec 1592 w/ microphonic output: advice needed | sanchezDos | Geekslutz forum | 2 | 19th March 2006 04:50 PM |
| Microphonic valves ? | espasonico | So much gear, so little time! | 5 | 13th June 2005 05:18 AM |
| microphonic cables and squealing | faeflora | Expert Question & Answer Archives (read only archive, not open for new posts) | 2 | 12th February 2003 11:15 PM |
![]() |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
| | #1 |
| Gear nut Join Date: Jan 2006 Location: Warsaw, MO
Posts: 88
| PICKUP IS MICROPHONIC? I have a Schecter with a SH-6 Distortion pup in the bridge. This pup has always been high output, but I think it has become microphonic. It just feeds back now at full volume, and is just SO hot. The pickup has a chrome cover on it (like the Gibsons) What are the signs of a microphonic pup? I have heard I shouldn't take the cover off of this pup because it's sealed or some shit, but I just can't take the feedback anymore, so I'm experimenting. buuuahahahahaha! I have the same model of pup in all my gits, and none of them act like this one. Any thoughts? |
| | |
| | #2 | |
| Lives for gear | Quote:
Don't take the cover off- you will likely screw the pickup. You need to have the pickup repotted- it is relatively cheap to do but not something to do alone if you have never done it before. Repotting is dipping it in hot wax. You need to get it to a precise temp though - around 150 degrees. Have a look here: Free information, Wax potting pickups at Stewart-MacDonald and Project Guitar :: Repotting Guitar Pickups Step by Step with photo's Or, if this is too tricky, you can replace it.
__________________ Regards, Jim Richmond "I don't go to mythical places with strange men." Douglas Adams | |
| | |
| | #3 |
| Gear nut Join Date: Jan 2006 Location: Warsaw, MO
Posts: 88
| I assumed it was ****ed! Thanks for the tip, dude. |
| | |
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
| |