Tascam DM24 question

seawell · 28th November 2003

Can you use the insert jacks on the Tascam DM24 as direct outs? In other words as an analog out(pre A/D converter).

jpaudio · 28th November 2003

Quote:

Originally posted by seawell
Can you use the insert jacks on the Tascam DM24 as direct outs? In other words as an analog out(pre A/D converter).

Never tried it but i don't see why not... i'll give it a whirl later and let you know for sure...

seawell · 28th November 2003

Thanks, I look forward to hearing back from you. The reason I am thinking about this is so that I can have some extra pre's going into my Radar 24. Of course I would want to use the Radar's converters and not the Tascam's so that's why I am hoping the insert will send a direct analog out signal pre A/D converter. I would try it myself but the DM24 won't arrive until late next week.

thethrillfactor · 28th November 2003

Quote:

Originally posted by seawell
Can you use the insert jacks on the Tascam DM24 as direct outs? In other words as an analog out(pre A/D converter).

Yes.

seawell · 29th November 2003

Thanks guys, one more question:
Can I use a standard TRS-DSUB snake cable to go into by Radar 24 or do the cables have to be modified to work with the insert jacks?

truthnlife13 · 29th December 2007

I just bought those insert - direct out convervsion adapters and it works fine, that is when my board works fine !

rhythminmind · 23rd June 2009

I'm thinking of getting a DM-24 to utilize more outboard, i've maxed out my audio interfaces. Can you use the analog inserts with ADAT inputs? Or have analog inserts on the bus outputs?

28th November 2003	#1
seawell Gear addict Join Date: Feb 2003 Location: Brown Summit, NC, USA Posts: 489 Thread Starter	Tascam DM24 question Can you use the insert jacks on the Tascam DM24 as direct outs? In other words as an analog out(pre A/D converter).

29th December 2007	#6
truthnlife13 Gear nut Join Date: Dec 2007 Location: Southern Maine Posts: 143	i do it I just bought those insert - direct out convervsion adapters and it works fine, that is when my board works fine ! __________________ Bad Bones Studio http://www.badbonesrecords.com "Let the music do the talking" TASCAM DM-24, ONYX 1640 W Firewire, MOTU 828 MKII,, POWER MAC DUAL 2.0 G5, DIGITAL PERFORMER 5, BIAS PEAK, AKG C414 X-BLS, SHURE SM 81, 57, 58, SENNHEISER MD421, AUDIX I5, AKG D112, RODE NT5,EV ND767, SE REFLEXION FILTER

23rd June 2009	#7
rhythminmind Lives for gear Join Date: May 2007 Location: Los Angeles Posts: 1,032	I'm thinking of getting a DM-24 to utilize more outboard, i've maxed out my audio interfaces. Can you use the analog inserts with ADAT inputs? Or have analog inserts on the bus outputs? __________________ "Any experiment of interest in life will be carried out at your own expense."

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Tascam DM24 question	pyelagin	High end	1	2nd September 2008 10:07 PM
Tascam DM24 question	pyelagin	Electronic Music Instruments & Electronic Music Production	0	2nd September 2008 07:41 PM
Tascam DM24 w/ Firewire exp question	statikcat	So much gear, so little time!	12	25th September 2006 08:47 PM
Tascam DM24 w/ Firewire exp question	statikcat	So much gear, so little time!	0	22nd September 2006 07:17 AM
Tascam DM24 vs Tascam M5000	Gaston69	So much gear, so little time!	3	11th July 2006 07:55 PM

29th November 2003	#5
seawell Gear addict Join Date: Feb 2003 Location: Brown Summit, NC, USA Posts: 489 Thread Starter	Thanks guys, one more question: Can I use a standard TRS-DSUB snake cable to go into by Radar 24 or do the cables have to be modified to work with the insert jacks?