Learning the Neve 8068

lehmancarson · 30th September 2011

I am starting to learn the Neve 8068 that we have at our studio and was wondering if there any tips, tricks or cautions past users might be willing to offer.

Geoff_T · 30th September 2011

Hi

Make sure someone put bracing bars between the upper and lower ISEP rails that support the channel routing units above the faders.

These are heavy modules that, on the 12 channel span, cause the lower rails to bend in the middle and causes intermittent connections from the modules.

Posted from my iPhone

30th September 2011	#1
lehmancarson Gear interested Joined: Sep 2011 Posts: 2 Thread Starter	Learning the Neve 8068 I am starting to learn the Neve 8068 that we have at our studio and was wondering if there any tips, tricks or cautions past users might be willing to offer.

30th September 2011	#2
Geoff_T Lives for gear Joined: Jul 2003 Location: Tujunga Posts: 3,722	Hi Make sure someone put bracing bars between the upper and lower ISEP rails that support the channel routing units above the faders. These are heavy modules that, on the 12 channel span, cause the lower rails to bend in the middle and causes intermittent connections from the modules. Posted from my iPhone __________________ Geoff Tanner Aurora Audio International See us on Facebook http://www.facebook.com/auroraaudio http://www.soundonsound.com/sos/may1...off-tanner.htm http://www.auroraaudio.net/ http://www.amazon.com/Window-Past-Ge...8737082&sr=1-9 http://www.grandmasterrecorders.com For quicker responses, please use my email (Geoff at auroraaudio.net) in preference to pm's on these forums.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search