neve channel dynamics functions

[toolstudio]

Soft Limit, Hard Limit

[beats workin']

now i fel like an idiot for not figuring that one out.
thanks for the reply,
david

[Geoff_T]

Originally Posted by beats workin'

now i fel like an idiot for not figuring that one out.
thanks for the reply,
david

Me also David!

Sorry that I couldn't remember such a simple thing!

Mind you, you've not had much help on that other forum!

[beats workin']

yeah, sometimes the most obvious stuff is right under your nose- like forgetting to plug in the AC cord....
the release on HL, when you hit it hard is ridiculously long. it comes up like a steam engine.
by the way, even when racking these modules you need the 25v logic to get output.
so it's that, plus 16v and the 48v phantom. working like a charm.
david

[Geoff_T]

Originally Posted by beats workin'

yeah, sometimes the most obvious stuff is right under your nose- like forgetting to plug in the AC cord....
the release on HL, when you hit it hard is ridiculously long. it comes up like a steam engine.
by the way, even when racking these modules you need the 25v logic to get output.
so it's that, plus 16v and the 48v phantom. working like a charm.
david

Hi David

I don't know if that's a typo but the logic is 16v... the audio is +/-16v and +/-25v for the VMOS output.