Analog Tape Survey

Fletcher · 14th January 2005

As most of have probably heard, Quantegy has filed for Chapter 11 proceedings. Michael Spitz (of ATR service) has been working on a new tape formulation for some time knowing the market for professional analog tape can no longer support a large facility and corporate structure like Quantegy or Emtec.

ATR Services is conducting an important market survey about your analog tape purchasing and would appreciate it if you could take the time to answer a few questions that will help us better gauge upcoming plans.

1. Are you currently using new professional analog tape?

2. Approximately how much of your budget is spent yearly on tape? $

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

6. Do you currently buy factory direct or use a distributor?

7. Where are you located?

Jules · 14th January 2005

1. Are you currently using new professional analog tape?

NO
2. Approximately how much of your budget is spent yearly on tape? $
NOTHING

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
NONE

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
DOES NOT APPLY

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
DOES NOT APPLY

6. Do you currently buy factory direct or use a distributor?
DOES NOT APPLY

7. Where are you located?
UK

**TonyBelmont** · 14th January 2005

1. Are you currently using new professional analog tape?
NO

2. Approximately how much of your budget is spent yearly on tape? $
NONE

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
NONE

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
SM900 or GP9 WHEN I DO USE TAPE, THOUGH RARELY...

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
DOES NOT APPLY

6. Do you currently buy factory direct or use a distributor?
DOES NOT APPLY

7. Where are you located?
BOSTON, MA

Ruudman · 14th January 2005

1. Yes
2. -
3. 1/4"
4. Would prefer to have both, but I'd choose med output
5. Yes, if the price is right
6. Distributor
7. Norway.

ruudman

**James Lugo** · 14th January 2005

Maybe it's just the crowd I run in but nobody's using tape anymore, even my friends with big studios and 2" machines. Protools all the way.

The Studers are all landing in the '2" Graveyard' - Coast Recording Supply, Hollywood, CA.

Steffmo · 14th January 2005

1. Are you currently using new professional analog tape? some

2. Approximately how much of your budget is spent yearly on tape? $3000.00

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? SM900

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
Definitely

6. Do you currently buy factory direct or use a distributor? Distributor....but whoever

7. Where are you located? CT, USA

LindanManor · 14th January 2005

1. Are you currently using new professional analog tape? *Yes

2. Approximately how much of your budget is spent yearly on tape? *$2000 CDN.

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) *2"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
*High Output

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. *Yes

6. Do you currently buy factory direct or use a distributor? *Distributor

7. Where are you located? *Toronto, Canada

hethaerto · 14th January 2005

Quote:

Originally posted by James 'LA' Lugo
Maybe it's just the crowd I run in but nobody's using tape anymore, even my friends with big studios and 2" machines. Protools all the way.

The Studers are all landing in the '2" Graveyard' - Coast Recording Supply, Hollywood, CA.

Man, I'm dyin' sitting here looking at your avatar! Has that photo been "altered"?
Allen

rainsinvelvet · 14th January 2005

1. Yes
2.$1000-$2000
3. 2"
4. mix of both
5. sure
6. anyone who's got it
7. California

ERic

TriTone Digital · 14th January 2005

1. Yes

2. 1500-2500

3. 2”, ½,” ¼ ”

4. Both

5. Yep

6. Distributor

7. Portland, OR

14th January 2005

1. Are you currently using new professional analog tape?
no

2. Approximately how much of your budget is spent yearly on tape? $
none

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
n/a

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
n/a

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
yes-if i got a tape machine

6. Do you currently buy factory direct or use a distributor?
n/a

7. Where are you located?
olympia, wa

Drumsound · 14th January 2005

Quote:

Originally posted by Fletcher

1. Are you currently using new professional analog tape?

2. Approximately how much of your budget is spent yearly on tape? $

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

6. Do you currently buy factory direct or use a distributor?

7. Where are you located?

1. Yes but I also use used tape

2. $2K ish

3. 2" 1/4"

4. High output

5. Yes

6. Distributor

7. Central Illinois

Knox · 15th January 2005

1. Are you currently using new professional analog tape?

yes . . .and I hope like hell to continue (own an Otari and Ampex)

2. Approximately how much of your budget is spent yearly on tape?

$thousands . . our whole studio is analog based

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

2 inch, 1/2 and 1/4

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

GP9 / 499

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

absolutely

6. Do you currently buy factory direct or use a distributor?

distributor . . . hell, I just hope to buy any tape, anywhere

7. Where are you located?

atlanta and nyc

bjornson · 15th January 2005

Quote:

Originally posted by Fletcher
As most of have probably heard, Quantegy has filed for Chapter 11 proceedings. Michael Spitz (of ATR service) has been working on a new tape formulation for some time knowing the market for professional analog tape can no longer support a large facility and corporate structure like Quantegy or Emtec.

ATR Services is conducting an important market survey about your analog tape purchasing and would appreciate it if you could take the time to answer a few questions that will help us better gauge upcoming plans.

1. Are you currently using new professional analog tape?
Yes

2. Approximately how much of your budget is spent yearly on tape? $
3K

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
All

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
Both

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
Yes

6. Do you currently buy factory direct or use a distributor?
Dist

7. Where are you located?

Pittsburgh

adamcal · 15th January 2005

1. YES

2. $1000ish I reuse tapes several times

3. 2" and 1/4"

4. GP9

5. Yes

6. whatever is eaiser

7. Melbourne, Australia

TwistTurner · 15th January 2005

1. Are you currently using new professional analog tape?

YES

2. Approximately how much of your budget is spent yearly on tape? $

$3000+

3. What tape widths do you currently use? (2? 1? ½,?¼ ?

2" & 1/4"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

456

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

YES

6. Do you currently buy factory direct or use a distributor?

DISTRIBUTOR

7. Where are you located?

CHICAGO

cannikin · 15th January 2005

1. Yes
2. 2,000 to 3,000
3. 1/2"
4. GP9
5. absolutely
6. distributor
7. NYC

audioboy6 · 15th January 2005

1. Are you currently using new professional analog tape?
Yes

2. Approximately how much of your budget is spent yearly on tape?
$1000

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
2", 1/2"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
Both

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
Yes

6. Do you currently buy factory direct or use a distributor?
Distributor

7. Where are you located?
SF, CA

jasonlivermore · 15th January 2005

1. Are you currently using new professional analog tape?

yes

2. Approximately how much of your budget is spent yearly on tape? $

2500

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

2", 1/2

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

sm900

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

yes

6. Do you currently buy factory direct or use a distributor?

distributor

7. Where are you located?

Ft. Collins, CO

thethrillfactor · 15th January 2005

1. Are you currently using new professional analog tape?

Yes.

2. Approximately how much of your budget is spent yearly on tape? $

$1.5k-$3k

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

Less-2",

More-1/2",1/4"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

High output please.

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

Absolutely if its of greater quality.

But please don't feel this is an excuse to charge some unfair price.

6. Do you currently buy factory direct or use a distributor?

Distributor.

7. Where are you located?

The Big Apple-NYC.

sixtoo · 15th January 2005

1. Are you currently using new professional analog tape?

Yes.

2. Approximately how much of your budget is spent yearly on tape? $

$900

3. What tape widths do you currently use? (2" ¼ ”)

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

High output.

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

Yes

6. Do you currently buy factory direct or use a distributor?

Distributor.

7. Where are you located?

Montreal

Slipperman · 15th January 2005

Yes.

Yes.

Yes.

Etc.

Please mfg.

Thank you.

SM.

Silver Sonya · 15th January 2005

1. Are you currently using new professional analog tape?

Yes

2. Approximately how much of your budget is spent yearly on tape?

$3K give/take

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

2", 1/2" and occasionally 1" for mixdown where the budget allows. (I do not own a 1" mixdown machine but I have used it in other high-end studios and mastering at The Lodge.)

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

SM900

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

The idea of a Mike Spitz-designed tape formulation makes me so happy that I'm giddy. All I can say is BASF 900 has some kind of special mojo that I've never understood and I miss it. Please study it and emulate its properties if at all possible.

6. Do you currently buy factory direct or use a distributor?

Distributor. But factory direct is probably the way to go.

The Reel Thing · 15th January 2005

Quote:

Originally posted by Fletcher

1. Are you currently using new professional analog tape?

Yes, I do

2. Approximately how much of your budget is spent yearly on tape?

$ 2500 +

3. What tape widths do you currently use?

mostly 1/2", but also 2", sometimes 1/4"

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

I currently use GP9, but not religiously. So. whatever sounds fine...

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

I wouldn't like to realign my entire tape machine every other day, so I would only use a new kind of tape if it is compatible with what's on the market. I don't think there's a need for better tape - tape nowadays is good enough as it is.

6. Do you currently buy factory direct or use a distributor?

Distributor

7. Where are you located?

Frankfurt, Germany

[/B]

warhead · 15th January 2005

1. Are you currently using new professional analog tape?

No.
2. Approximately how much of your budget is spent yearly on tape? $

0
3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)

n/a
4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

n/a
5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

n/a
6. Do you currently buy factory direct or use a distributor?

n/a
7. Where are you located?

SC, USA

13chroma20 · 15th January 2005

1. Are you currently using new professional analog tape?
yes

2. Approximately how much of your budget is spent yearly on tape?
$250-500

3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”)
1/2", 2" if the client can afford it

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
medium (pref. 456)

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
yes, as long as it's affordable (close to current tape costs)

6. Do you currently buy factory direct or use a distributor?
distributor

7. Where are you located?

NY, NY

Musiclab · 15th January 2005

Topic Review (Newest First)
1. Are you currently using new professional analog tape?
yes absolutely

2. Approximately how much of your budget is spent yearly on tape?
2-3000 a year

3. What tape widths do you currently use? (2”, 1”, 1/2,” 1/4 ”)
2" I have no problem convincing my clients to use tape

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?
High output GP9

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.
yes, as long as it's affordable (close to current tape costs)
yes

6. Do you currently buy factory direct or use a distributor?
distributor
yes total media

7. Where are you located?

Elmont, NY

jon · 15th January 2005

YES.

$5,000 TO $10,000.

2" mostly and some 1/2". Would like to use 2 track 1" at some point if tape stock were reliably available in the future.

GP9 and SM900 only.

HELL YES we would....but to give your tape a chance to be included in future record production budgets it would be important to keep the price at or even under previous levels.

Both. I prefer direct.

Paris, France.

THANK YOU Fletcher and Mike.

mr scratchy esq · 15th January 2005

1. Are you currently using new professional analog tape?

Yes.

2. Approximately how much of your budget is spent yearly on tape? $

$2000 - once I'm fully operational (2006) I expect to spend $9000+

3. What tape widths do you currently use? (2" ¼ ”)

1" (8 trk), 1/2" (4 trk), 1/4" (full & half trk.)

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

456

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

Yes

6. Do you currently buy factory direct or use a distributor?

Distributor.

7. Where are you located?

Pittsburgh

Bill McAdams

Teen Regime Studios

www.hifrequencies.com

ROBB007 · 15th January 2005

Are you currently using new professional analog tape?

no

2. Approximately how much of your budget is spent yearly on tape? none

3. What tape widths do you currently use?
none **LOGIC*PRO TOOLS**MAXTOR 10K4 SCSI DRIVES

4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both?

none

5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available.

Yes

6. Do you currently buy factory direct or use a distributor?

Distributor.

7. Where are you located?

VANCOUVER BC***

14th January 2005	#1
Fletcher member no 666 Joined: Jun 2002 Location: Durham, NC Posts: 10,108 Thread Starter	Analog Tape Survey As most of have probably heard, Quantegy has filed for Chapter 11 proceedings. Michael Spitz (of ATR service) has been working on a new tape formulation for some time knowing the market for professional analog tape can no longer support a large facility and corporate structure like Quantegy or Emtec. ATR Services is conducting an important market survey about your analog tape purchasing and would appreciate it if you could take the time to answer a few questions that will help us better gauge upcoming plans. 1. Are you currently using new professional analog tape? 2. Approximately how much of your budget is spent yearly on tape? $ 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. 6. Do you currently buy factory direct or use a distributor? 7. Where are you located? __________________ CN Fletcher Professional Affiliations: R/E/P Professional Recording Engineer and Producer forums - serious hobbyists welcome SoundPure.com mwagener wrote on Sat, 11 September 2004 14:33 We are selling emotions, there are no emotions in a grid Roscoe Ambel once said: Pro-Tools is to audio what fluorescent is to light

14th January 2005	#2
Jules Gearslutz.com admin Joined: Apr 2002 Location: A Yank in London, UK Posts: 17,805 1 Review written	Re: Analog Tape Survey 1. Are you currently using new professional analog tape? NO 2. Approximately how much of your budget is spent yearly on tape? $ NOTHING 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) NONE 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? DOES NOT APPLY 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. DOES NOT APPLY 6. Do you currently buy factory direct or use a distributor? DOES NOT APPLY 7. Where are you located? UK __________________ Jules Add your reviews to the new reviews area! Gearslutz on Facebook Follow my GS picks on Twitter

14th January 2005	#3
TonyBelmont Moderator Joined: Feb 2004 Location: Boston,MA Providence,RI Posts: 15,919	1. Are you currently using new professional analog tape? NO 2. Approximately how much of your budget is spent yearly on tape? $ NONE 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) NONE 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? SM900 or GP9 WHEN I DO USE TAPE, THOUGH RARELY... 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. DOES NOT APPLY 6. Do you currently buy factory direct or use a distributor? DOES NOT APPLY 7. Where are you located? BOSTON, MA __________________ Tony Belmont We Sell Gear! High Profile Audio.....PluginDiscounts.com I may on occasion talk about some of the products I am a dealer for in my posts.. and that's OK! I sell them because I like them. Not vice versa. It's more fun to talk about things you know and love, then things you don't.

14th January 2005	#4
Ruudman Lives for gear Joined: Mar 2003 Location: Norway Posts: 3,086	1. Yes 2. - 3. 1/4" 4. Would prefer to have both, but I'd choose med output 5. Yes, if the price is right 6. Distributor 7. Norway. ruudman __________________ Working Class Hero Visit this website of Noma Children Hospital Sokoto

14th January 2005	#5
James Lugo Moderator Joined: May 2004 Location: Raleigh, NC Posts: 6,994	Maybe it's just the crowd I run in but nobody's using tape anymore, even my friends with big studios and 2" machines. Protools all the way. The Studers are all landing in the '2" Graveyard' - Coast Recording Supply, Hollywood, CA. __________________ Vocal Asylum & Hemispheres Recording - http://www.sslmixingonline.com/ http://www.HemispheresRecording.com - http://www.youtube.com/user/jameslugo Now affiliated with Sound Pure Pro Audio & Guitars / Boutique Amps Check out my first video tutorial release on Groove3: http://www.groove3.com/str/vocal-asylum.html

14th January 2005	#6
Steffmo Lives for gear Joined: Sep 2004 Location: West Haven, CT Posts: 3,018	1. Are you currently using new professional analog tape? some 2. Approximately how much of your budget is spent yearly on tape? $3000.00 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2" 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? SM900 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Definitely 6. Do you currently buy factory direct or use a distributor? Distributor....but whoever 7. Where are you located? CT, USA

14th January 2005	#7
LindanManor Gear nut Joined: Sep 2004 Location: Toronto, Canada Posts: 99	1. Are you currently using new professional analog tape? Yes 2. Approximately how much of your budget is spent yearly on tape? $2000 CDN. 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2" 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? High Output 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Yes 6. Do you currently buy factory direct or use a distributor? Distributor 7. Where are you located? *Toronto, Canada

14th January 2005	#9
rainsinvelvet Lives for gear Joined: Sep 2003 Location: California Posts: 1,196 1 Review written	1. Yes 2.$1000-$2000 3. 2" 4. mix of both 5. sure 6. anyone who's got it 7. California ERic

14th January 2005	#10
TriTone Digital Gear nut Joined: Aug 2004 Location: NYC and Paris Posts: 119	1. Yes 2. 1500-2500 3. 2”, ½,” ¼ ” 4. Both 5. Yep 6. Distributor 7. Portland, OR __________________ TriTone Digital www.tritonedigital.com

14th January 2005	#11
chikkenguy Guest Posts: n/a	Re: Analog Tape Survey 1. Are you currently using new professional analog tape? no 2. Approximately how much of your budget is spent yearly on tape? $ none 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) n/a 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? n/a 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. yes-if i got a tape machine 6. Do you currently buy factory direct or use a distributor? n/a 7. Where are you located? olympia, wa

15th January 2005	#13
Knox Lives for gear Joined: Jun 2002 Posts: 1,455	1. Are you currently using new professional analog tape? yes . . .and I hope like hell to continue (own an Otari and Ampex) 2. Approximately how much of your budget is spent yearly on tape? $thousands . . our whole studio is analog based 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2 inch, 1/2 and 1/4 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? GP9 / 499 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. absolutely 6. Do you currently buy factory direct or use a distributor? distributor . . . hell, I just hope to buy any tape, anywhere 7. Where are you located? atlanta and nyc __________________ Knox

15th January 2005	#15
adamcal Lives for gear Joined: Dec 2002 Location: Melbourne, Australia Posts: 1,345	1. YES 2. $1000ish I reuse tapes several times 3. 2" and 1/4" 4. GP9 5. Yes 6. whatever is eaiser 7. Melbourne, Australia __________________ Adam Calaitzis www.toyland.com.au www.facebook.com/ToylandRecordingStudio "what is it you cant face" "I'm a country member"

15th January 2005	#16
TwistTurner Gear Head Joined: Jan 2003 Posts: 61	1. Are you currently using new professional analog tape? YES 2. Approximately how much of your budget is spent yearly on tape? $ $3000+ 3. What tape widths do you currently use? (2? 1? ½,?¼ ? 2" & 1/4" 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? 456 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. YES 6. Do you currently buy factory direct or use a distributor? DISTRIBUTOR 7. Where are you located? CHICAGO

15th January 2005	#17
cannikin Gear maniac Joined: Sep 2003 Location: San Francisco CA Posts: 220	1. Yes 2. 2,000 to 3,000 3. 1/2" 4. GP9 5. absolutely 6. distributor 7. NYC __________________ cannikin life is still sweet

15th January 2005	#18
audioboy6 Gear maniac Joined: Nov 2004 Location: Minneapolis Posts: 151	1. Are you currently using new professional analog tape? Yes 2. Approximately how much of your budget is spent yearly on tape? $1000 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2", 1/2" 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? Both 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Yes 6. Do you currently buy factory direct or use a distributor? Distributor 7. Where are you located? SF, CA

15th January 2005	#19
jasonlivermore Gear maniac Joined: Aug 2003 Location: ft collins co Posts: 275	1. Are you currently using new professional analog tape? yes 2. Approximately how much of your budget is spent yearly on tape? $ 2500 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2", 1/2 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? sm900 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. yes 6. Do you currently buy factory direct or use a distributor? distributor 7. Where are you located? Ft. Collins, CO

15th January 2005	#20
thethrillfactor Gear Guru Joined: Jun 2002 Location: New York City Posts: 14,177	1. Are you currently using new professional analog tape? Yes. 2. Approximately how much of your budget is spent yearly on tape? $ $1.5k-$3k 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) Less-2", More-1/2",1/4" 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? High output please. 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Absolutely if its of greater quality. But please don't feel this is an excuse to charge some unfair price. 6. Do you currently buy factory direct or use a distributor? Distributor. 7. Where are you located? The Big Apple-NYC.

15th January 2005	#21
sixtoo Gear maniac Joined: Sep 2003 Location: Montreal Posts: 228	1. Are you currently using new professional analog tape? Yes. 2. Approximately how much of your budget is spent yearly on tape? $ $900 3. What tape widths do you currently use? (2" ¼ ”) 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? High output. 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Yes 6. Do you currently buy factory direct or use a distributor? Distributor. 7. Where are you located? Montreal __________________ Sixtoo, Producer. Ninja Tune Records/ Mush/ Vertical Form/Bully. Montreal, Canada. http://www.sixtoo.net/

15th January 2005	#22
Slipperman Harmless Wacko Joined: Dec 2002 Location: A prison cell with soffit mounts Posts: 1,716	Yes. Yes. Yes. Etc. Please mfg. Thank you. SM.

15th January 2005	#23
Silver Sonya Lives for gear Joined: Sep 2004 Location: Washington, DC Posts: 7,209	1. Are you currently using new professional analog tape? Yes 2. Approximately how much of your budget is spent yearly on tape? $3K give/take 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 2", 1/2" and occasionally 1" for mixdown where the budget allows. (I do not own a 1" mixdown machine but I have used it in other high-end studios and mastering at The Lodge.) 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? SM900 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. The idea of a Mike Spitz-designed tape formulation makes me so happy that I'm giddy. All I can say is BASF 900 has some kind of special mojo that I've never understood and I miss it. Please study it and emulate its properties if at all possible. 6. Do you currently buy factory direct or use a distributor? Distributor. But factory direct is probably the way to go.

15th January 2005	#25
warhead Jai guru deva om Joined: Feb 2003 Location: South Carolina Posts: 12,253	Re: Analog Tape Survey 1. Are you currently using new professional analog tape? No. 2. Approximately how much of your budget is spent yearly on tape? $ 0 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) n/a 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? n/a 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. n/a 6. Do you currently buy factory direct or use a distributor? n/a 7. Where are you located? SC, USA __________________ Warren Dent, Owner - ZenPro Audio: Gear Now & Zen

15th January 2005	#26
13chroma20 Gear interested Joined: Dec 2003 Location: NYC Posts: 29	1. Are you currently using new professional analog tape? yes 2. Approximately how much of your budget is spent yearly on tape? $250-500 3. What tape widths do you currently use? (2”, 1”, ½,” ¼ ”) 1/2", 2" if the client can afford it 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? medium (pref. 456) 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. yes, as long as it's affordable (close to current tape costs) 6. Do you currently buy factory direct or use a distributor? distributor 7. Where are you located? NY, NY

15th January 2005	#27
Musiclab Lives for gear Joined: Sep 2002 Location: Elmont NY Posts: 6,275 3 Reviews written	Topic Review (Newest First) 1. Are you currently using new professional analog tape? yes absolutely 2. Approximately how much of your budget is spent yearly on tape? 2-3000 a year 3. What tape widths do you currently use? (2”, 1”, 1/2,” 1/4 ”) 2" I have no problem convincing my clients to use tape 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? High output GP9 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. yes, as long as it's affordable (close to current tape costs) yes 6. Do you currently buy factory direct or use a distributor? distributor yes total media 7. Where are you located? Elmont, NY __________________ Lou Gimenez www.musiclabnyc.com

15th January 2005	#28
jon Capitol Studios Paris Joined: May 2002 Location: Paris, France Posts: 1,307	Re: Analog Tape Survey YES. $5,000 TO $10,000. 2" mostly and some 1/2". Would like to use 2 track 1" at some point if tape stock were reliably available in the future. GP9 and SM900 only. HELL YES we would....but to give your tape a chance to be included in future record production budgets it would be important to keep the price at or even under previous levels. Both. I prefer direct. Paris, France. THANK YOU Fletcher and Mike. __________________ Jon Atack Capitol Studios - Paris, France

15th January 2005	#29
mr scratchy esq Gear nut Joined: Dec 2003 Location: Pittsburgh Posts: 93	1. Are you currently using new professional analog tape? Yes. 2. Approximately how much of your budget is spent yearly on tape? $ $2000 - once I'm fully operational (2006) I expect to spend $9000+ 3. What tape widths do you currently use? (2" ¼ ”) 1" (8 trk), 1/2" (4 trk), 1/4" (full & half trk.) 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? 456 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Yes 6. Do you currently buy factory direct or use a distributor? Distributor. 7. Where are you located? Pittsburgh Bill McAdams Teen Regime Studios www.hifrequencies.com __________________ Teen Regime Studios www.teenregimestudios.com

15th January 2005	#30
ROBB007 Gear nut Joined: Dec 2002 Location: VANCOUVER CANADA Posts: 110	Are you currently using new professional analog tape? no 2. Approximately how much of your budget is spent yearly on tape? none 3. What tape widths do you currently use? none *LOGICPRO TOOLSMAXTOR 10K4 SCSI DRIVES 4. Do you prefer to use high output tape (SM900, GP9), medium output tape (911, 456) or a mix of both? none 5. If ATR Services were to invest in a new tape line, would you support this effort by purchasing our tape? This question assumes that the tape is of equal or greater quality than what is currently available. Yes 6. Do you currently buy factory direct or use a distributor? Distributor. 7. Where are you located? VANCOUVER BC*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
ANALOG TAPE SOUND	affinitysound	Rap + Hip Hop engineering & production	77	29th November 2008 07:14 PM
Analog Tape Update	NathanEldred	The Good News Channel	3	18th March 2005 03:38 PM
ATR Survey ... How Much Tape Do You Use?	lucey	High end	0	13th January 2005 10:04 PM
Analog Tape	Hexfix93	So much gear, so little time!	11	7th April 2004 04:28 PM