new mic pre eq from chandler LIMITED

PRINCE JAMAL · 21st January 2004

ANYBODY KNOWS ABOUT THE NEW CHANDLER MIC PRE EQ ,NOT THE LTD1 BUT THE CHANDLER CHANNEL

tunesmith · 21st January 2004

The grapevine says it's the same pre as the TG2 coupled with a 3 band eq that we haven't seen before.

I am sure about the pre, guestimating on the EQ.

Tunes

Ollie · 22nd January 2004

I also hear that Chandler will be coming out with a console in the near future.

paterno · 22nd January 2004

Quote:

Originally posted by PRINCE JAMAL
ANYBODY KNOWS ABOUT THE NEW CHANDLER MIC PRE EQ ,NOT THE LTD1 BUT THE CHANDLER CHANNEL

I posted something here a few weeks ago about it. I have been testing one out. It has an EMI pre and a three band passive EQ -- the high and low bands have peak and shelf EQ points and are gain only, and the mid band selections have a narrow Q and are cut only. there is a fixed high pass filter and a narrow Q selection for the high band. It can be used in line or mic mode, has phantom power, polarity flip, and has seperate gain and output controls. Search for the TG Channel -- I'm sure i wrote a little more about it there...

cheers,
john

littledoodler · 22nd January 2004

It's in a full page ad in the new tape op.

Input- combines 2.4k ohm mic input and a 10k line input which is selectable with the line switch. The 15 position switch attenuates mic and line and gives a large range of control for normal uses.
mic gain -15db to +55db
line gain -25db to +45db

Output-functioning as a console fader, this control is placed after the input stage and before the output stage. This allows for trimming of the input signal, as well as allowing the user to run the input very hot without distorting the recorder.

High EQ-a highboost control with 18db of gain and a select switch that combines shelf and peak settings. Shelf characteristic is resistor capacitor based and the peak types are inductor style.
16k,12k,8.1k,6.8k shelf.
5.8k, 3.9k, 2.2k, 1.8k, 1.2k peak.
Hi-Q switch for peaks.

Mid-EQ A mid frequency EQ with a 20db of cut with six points set at very sharp
"Q". Specially designed to fix problem areas. All inductor based.
350,400,500,600,750,850 hz.

Low EQ-A low boost control with 20db of gain and a select switch that combines shelf and peak settings. Both peak and shelf characteristics are inductor based, and on the peak settings "Q" gets sharper with more boost. 50, 70, 100, 200 peak.
100, 200 shelf.
100hz low cut.

21st January 2004	#1
PRINCE JAMAL Gear maniac Joined: Oct 2003 Location: NY Posts: 222 Thread Starter	new mic pre eq from chandler LIMITED ANYBODY KNOWS ABOUT THE NEW CHANDLER MIC PRE EQ ,NOT THE LTD1 BUT THE CHANDLER CHANNEL __________________ PJAMAL

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
New mic pre/compressor from Safe Sound Audio	SafeSoundAudio	Product Alerts older than 2 months	17	6th November 2011 11:16 PM
Daking Mic Pre/EQ X Chandler LTD1	Adura	So much gear, so little time!	9	20th July 2011 11:39 AM
Neve output transformers from Altran sound incredible	ROCK777	So much gear, so little time!	35	18th January 2009 11:07 AM
New Mic or New Pre?	Phrazemaster	High end	21	2nd January 2007 12:26 AM
Kick ass new mic pre kit from JLM Audio	fatty	So much gear, so little time!	0	16th April 2004 04:49 AM

21st January 2004	#2
tunesmith Lives for gear Joined: Jan 2003 Location: Just northeast of LaLa land Posts: 709	The grapevine says it's the same pre as the TG2 coupled with a 3 band eq that we haven't seen before. I am sure about the pre, guestimating on the EQ. Tunes

22nd January 2004	#3
Ollie Lives for gear Joined: Jan 2004 Location: Chicago Posts: 1,010 1 Review written	I also hear that Chandler will be coming out with a console in the near future.

22nd January 2004	#5
littledoodler Lives for gear Joined: Oct 2003 Location: Beezers' Nook Posts: 780 1 Review written	It's in a full page ad in the new tape op. Input- combines 2.4k ohm mic input and a 10k line input which is selectable with the line switch. The 15 position switch attenuates mic and line and gives a large range of control for normal uses. mic gain -15db to +55db line gain -25db to +45db Output-functioning as a console fader, this control is placed after the input stage and before the output stage. This allows for trimming of the input signal, as well as allowing the user to run the input very hot without distorting the recorder. High EQ-a highboost control with 18db of gain and a select switch that combines shelf and peak settings. Shelf characteristic is resistor capacitor based and the peak types are inductor style. 16k,12k,8.1k,6.8k shelf. 5.8k, 3.9k, 2.2k, 1.8k, 1.2k peak. Hi-Q switch for peaks. Mid-EQ A mid frequency EQ with a 20db of cut with six points set at very sharp "Q". Specially designed to fix problem areas. All inductor based. 350,400,500,600,750,850 hz. Low EQ-A low boost control with 20db of gain and a select switch that combines shelf and peak settings. Both peak and shelf characteristics are inductor based, and on the peak settings "Q" gets sharper with more boost. 50, 70, 100, 200 peak. 100, 200 shelf. 100hz low cut.