Wiring My Guitar

[JamieOxford]

Not to be harsh, but you're asking for a lot. That's a custom wiring diagram that someone will have to sit and design for you. Have a look on the Seymour Duncan site - they've got some decent diagrams there.

Pretty sure a modified version of this is what you'd want:
Link

I've heard of the S-1 and TBX pots but I'm not familiar with them. I might be able to give you a hand modifying the schematic above.

If you learn how to design and wire guitars yourself, you'll be proud and it's a skill you won't forget. Plus you can start charging for your services and make some money!

[gingataff]

Seeing as you've got BKPs, I'd recommend asking this question on the Bare Knuckle forum, lots of experienced users and luthiers there who can give you diagrams and help.

[sickthink]

yehhhhh, unfortunately, you're just gonna have to sit down and figure it out looking at the diagram for the switch and pickups, and draw it out yrself. It's all about signal flow! I was in the same boat as you when I redid my guitar. It's not that bad/difficult, just time-intensive since it's yr first time, and you'll feel smart and accomplished once you get it down. Gotta check out BKPs some more though.

[e3p0]

S-1 is kind of overkill if all you want is a coiltap. A push-pull or push-push is a bit simpler. Stumac and Seymour Duncan sites have examples that are close but will take a bit of improv. I think you could possibly benefit from the Fender "super switch" too.

The TBX comes with a diagram that you can easily add to any.
-e