AKG D 202 repair or schematics

[tINY]

AKG Model D 202 E1 and D 222

Here is a cut-away view and a schematic - not much to a dynamic mic (except the cross-over in this case).



-tINY

[Swing]

Thanks very much for that link. I had seen that before posting, but was hoping to find more detailed info and possibly info on who might service this old mic if I run into problems esp. with the crossover.

Also, any ideas on where to locate very, very small and odd screws and bolts, in case I need to replace some?

Thanks again.

[tINY]

In the states, I'd say go online and find a gunsmith's supplier or an industrial supplier who carries maintenence items for machine tools.

I don't know about France.



-tINY

[Swing]

Thanks tINY, I'll check around online . . .

[Lotus 7]

The small metric screws for mics can sometimes be found through clock and watchmaker supply sources and/or modelmakers suppliers. Try this link for some contacts.

You will need to identify the screw thread size.