XLR input plates

Phil Gorey · 17th June 2006, 01:57 AM

I've been searching online for a while....I'm trying to find some clean looking universal punch out wall panels to support up to 16 xlr ins and 2 xlr outs. 2 RJ45 ports and 2 1/4 inch unbalanced input / output.

Basically I'm going to have this one in our live room. I don't want to custom build these...
I pretty much just want to solder all my connections, label it up and slap it in the wall.

On the other side of the main room, I'd like the same panel with only 8 xlr ins.
I'd like to have two 4 xlr in versions of the same plate for the hallway and booth.

All of these plates would have the 2 RJ45 ports, 2XLR outs, 2 1/4 inch in/outs

Anyone have any good resources for a company I can order all of these panels from in one shot?

Thanks for your input in advance

tINY · 17th June 2006, 08:32 AM

DO you mean like this:

http://www.whirlwindusa.com/wall01.html

...or this?

http://www.whirlwindusa.com/rack01.html#rh

I'd check with Whirlwind - you might ask about custome stuff too - it usually isn't that spendy to have a standard plate punched with what you neeed.

-tINY

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
combo mic/line input. trs or xlr patchbay?	quincyg	So much gear, so little time!	13	21st May 2006 06:41 PM
xlr wall plates / connectors	KurtR	So much gear, so little time!	4	26th October 2005 01:32 AM
HELP XLR 1/4 combination input connector?	Coldsnow	So much gear, so little time!	1	29th September 2003 07:46 PM

17th June 2006, 01:57 AM	#1
Phil Gorey Gear Head Join Date: Mar 2005 Location: Boston, MA Posts: 33	XLR input plates I've been searching online for a while....I'm trying to find some clean looking universal punch out wall panels to support up to 16 xlr ins and 2 xlr outs. 2 RJ45 ports and 2 1/4 inch unbalanced input / output. Basically I'm going to have this one in our live room. I don't want to custom build these... I pretty much just want to solder all my connections, label it up and slap it in the wall. On the other side of the main room, I'd like the same panel with only 8 xlr ins. I'd like to have two 4 xlr in versions of the same plate for the hallway and booth. All of these plates would have the 2 RJ45 ports, 2XLR outs, 2 1/4 inch in/outs Anyone have any good resources for a company I can order all of these panels from in one shot? Thanks for your input in advance __________________ -Phil

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

17th June 2006, 08:32 AM	#2
tINY Lives for gear Join Date: Jul 2004 Location: Orygun Posts: 6,053	DO you mean like this: http://www.whirlwindusa.com/wall01.html ...or this? http://www.whirlwindusa.com/rack01.html#rh I'd check with Whirlwind - you might ask about custome stuff too - it usually isn't that spendy to have a standard plate punched with what you neeed. -tINY