Schroeder diffusers

C.Lambrechts · 28th September 2003, 02:53 PM

In short and to the point :

situation : on the edge of building a studio (A and B) complex. Construction to start this winter. We've had some help from a guy from the RTBF (belgian national radio) who is an acoustician. Advising us in construction / materials etc etc ... a couple of days ago he provided us with a calculation sheet of difusions / resonances of frequencies in the control room A. a 5 page paper with loads of numbers and formulas which are chinese to me.

question 1 :
Anyone out here care to have a look at the numbers for me and see if they make sence ???

the numbers are supposed to be the basis on which we are going to have to construct a schroeder diffusion wall in the back of the control room amongst others.

question 2 :

anyone know a company that could make a detailed plan / layout based on the numbers of how that panel should be constructed ???

The guy who did the calculations is going to do it for us ... but I'm especially curious if other opinions about the same matter would give similar results or completely different ones.

Thanks

Thermionic · 28th September 2003, 04:51 PM

Not sure this is of help, but this company was founded by ex-Munro designers, check out their gallery:

http://www.aaa-design.com/

They also make a variety of off-the-shelf solutions as well as some particularly good speaker stands.

**Tim Farrant** · 29th September 2003, 05:35 AM

Hi Chris,

I do a bit of design acoustic work, currently working on a new large mastering room in fact. I would be interested in looking at your plans and figures. Myself, I don't get too much into the maths behind acoustics and tend to use common sense and my ears !! But most of the rooms I've done the clients have been more than happy with. Send me a PM if you like.

Cheers
Tim.

C.Lambrechts · 30th September 2003, 07:02 AM

Quote:

Originally posted by The Buzz
. Send me a PM if you like.

done

faeflora · 30th September 2003, 09:06 PM

Could I see this worksheet? I am curious. I have a beginner's knowledge of acoustic science/math.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RPG Skyline Diffusers	Dopamine	Bass traps, acoustic panels, foam etc	24	14th January 2008 09:43 PM
DIY SKY LINE DIFFUSERS	arexo	Low End Theory	2	5th April 2006 07:29 PM

28th September 2003, 02:53 PM	#1
C.Lambrechts Lives for gear Join Date: May 2002 Location: Ans (Liege) Belgium Posts: 3,214	Schroeder diffusers In short and to the point : situation : on the edge of building a studio (A and B) complex. Construction to start this winter. We've had some help from a guy from the RTBF (belgian national radio) who is an acoustician. Advising us in construction / materials etc etc ... a couple of days ago he provided us with a calculation sheet of difusions / resonances of frequencies in the control room A. a 5 page paper with loads of numbers and formulas which are chinese to me. question 1 : Anyone out here care to have a look at the numbers for me and see if they make sence ??? the numbers are supposed to be the basis on which we are going to have to construct a schroeder diffusion wall in the back of the control room amongst others. question 2 : anyone know a company that could make a detailed plan / layout based on the numbers of how that panel should be constructed ??? The guy who did the calculations is going to do it for us ... but I'm especially curious if other opinions about the same matter would give similar results or completely different ones. Thanks __________________ Chris Lambrechts MiLaR Event ITB or OTB ... Who cares .... it's all about MIXING.

29th September 2003, 05:35 AM	#3
Tim Farrant Moderator Join Date: Jun 2002 Location: New Zealand Posts: 1,833	Hi Chris, I do a bit of design acoustic work, currently working on a new large mastering room in fact. I would be interested in looking at your plans and figures. Myself, I don't get too much into the maths behind acoustics and tend to use common sense and my ears !! But most of the rooms I've done the clients have been more than happy with. Send me a PM if you like. Cheers Tim. __________________ innovative outboard processing

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

28th September 2003, 04:51 PM	#2
Thermionic Lives for gear Join Date: Mar 2003 Location: UK Posts: 660	Not sure this is of help, but this company was founded by ex-Munro designers, check out their gallery: http://www.aaa-design.com/ They also make a variety of off-the-shelf solutions as well as some particularly good speaker stands.

30th September 2003, 09:06 PM	#5
faeflora Lives for gear Join Date: Oct 2002 Location: washington dc Posts: 2,010	Could I see this worksheet? I am curious. I have a beginner's knowledge of acoustic science/math.